ap2002

iTrader: (8)

I just got my 212/218 installed this sat... and it sounds good... does not lope real hard but you can certainly tell its in there, its is a mild lope...

mwalls54

i was running a comp cam 214/220 559/564 116lsa in my lq9 and it was a great cam. it had a little lope but made good power. I am actaully selling this cam if you are interested.

gonzo 6.2

iTrader: (8)

13.5 N/A,dam strong could you list your mods please.

mwalls54

I was running the cam above, 918 springs, ASM long tubes, UDPs, efans, tunning. trailblazer stall that was round 2400rpm, shift kit. some tunning and thats about it.

gonzo 6.2

iTrader: (8)

What have you changed since and what do you think your new times might be?

mwalls54

I have changed the whole motor, i am running a 408 now. With some tunning and the right conditions i am hopping for high 12s n/a

gonzo 6.2

iTrader: (8)

408,hell I knew that,just forgot.I bet you will be in the mid to low 12s,anyway 13.5 is dam strong for no more than you had at the time.

98TAauto

iTrader: (2)

i have the 210/218 .530 114 cam and it has a mild lope in my truck.. you definitly can hear it But i have no cats, asm's and a round dynomax muffler.. with open headers it sounded like a 240/238 cam lol

i'd get the comp so you have some low end.. check out the vinci cams though They have those exact specs

i just used ls6 springs and chromemoly pushrods in mine

Flyer

iTrader: (1)

Comp Cam 216/220 112 or 114, take your pic. I'd go there at the very least. I'd prefer the 220/224 114 or on a 112 either one, if it were me though.

Flyer

iTrader: (1)

The ls6 cam would be a waste of time too. It shouldn't even be considered.