Holty

iTrader: (6)

With new blower coming and the LPE 100mm MAF i'm going to need to make a custom intake tube to connect it all up to my Airaid cold air box. Do any of you guys have any ideas on this? I don't even know where to begin on a project like this. If you have a custom setup would you mind posting pics of yours? Also, where can i go online to purchase the tubing and the couplers, hardware, etc? thanks! What kind of materials should i use?

Quik

iTrader: (7)

wait till you get motor and blower in place then we go from there. its not that much work bud....im going to be making a custom intake in near future

03sierraslt

iTrader: (22)

?? I dont know, I am still pissing with mine josh, trying to make the volant box work. My problem is that being my blower is off manifold I dont have much room on that side to come out of the air box and turn to get up to the blower. Especially with the MAF there, so my solution is ditch the MAF then it will work. Just waiting on the right 2bar map to show up.

03sierraslt

iTrader: (22)

If you need any links for silicone couplers etc. Let me know, I have at least a dozen from when I did the intercooler.

Holty

iTrader: (6)

i NEED them Pat! shoot me a pm or email if you would!

.T.

FWIW carbon fiber comes in a variety of tube diameters (ie sailing applications) and could be used with elbows and couplers for a killer heat-resistant custom kit.

nightrunner

iTrader: (4)

any idea on where i could get this

thinkin about gettin the GMPP cai and using just the intake box and making my own tube and connections

dewmanshu

iTrader: (4)

or model rocket makers...

paste this number 280104171155 into the ebay search. F-ing cool. Seemingly cheap. I may just pick up a piece or 2.

03sierraslt

iTrader: (22)

hey thats pretty cool, I might have to get some.. I could bid against josh to raise his price. haha.

Holty

iTrader: (6)