And easy IC for STS kits??
#1
12 Second Truck Club
Thread Starter
Join Date: Feb 2002
Location: Sacramento, CA
Posts: 5,575
Likes: 0
Received 0 Likes
on
0 Posts
And easy IC for STS kits??
Check here.
https://ls1tech.com/forums/showthrea...25#post1664425
Heath found this baby on Ebay which is funny because I sell OBX products at my shop and have seen these but never had specs so I assumed it was 2" or maybe 2.5" inlet/outlet and made for Hondas so I never gave it thought.
The price is actually less than my cost on it by a lil so it's a smokin deal. Rick looked at my truck today after I told him about it and he said there is tons of room to put it wherever and fabing a pipe to to to it from the STS intake pipe would be a piece of cake. So for those who want something quick, cheap and easy this seems like a nice piece.
I'm still gonna run Alky but if I can get the IATs down to the 110-120deg range before I start spraying then I could realistically end up with well below ambient temps. Woot!
https://ls1tech.com/forums/showthrea...25#post1664425
Heath found this baby on Ebay which is funny because I sell OBX products at my shop and have seen these but never had specs so I assumed it was 2" or maybe 2.5" inlet/outlet and made for Hondas so I never gave it thought.
The price is actually less than my cost on it by a lil so it's a smokin deal. Rick looked at my truck today after I told him about it and he said there is tons of room to put it wherever and fabing a pipe to to to it from the STS intake pipe would be a piece of cake. So for those who want something quick, cheap and easy this seems like a nice piece.
I'm still gonna run Alky but if I can get the IATs down to the 110-120deg range before I start spraying then I could realistically end up with well below ambient temps. Woot!
#4
TECH Apprentice
Join Date: Jan 2004
Location: Frisco TX (Dallas Area)
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
That looks like a sweet unit and the price is really good.
Some food for thought though. Boost and IC'd boost is a balancing act. A good IC will cost at least 2 psi at the TB. That's well worth it if your temps are out of hand (200 degrees), because the IC should drop 200 degree air down to about 100 degrees. The problem is that to get the same boost at the TB, you've got to raise the boost at the charger, which raises the charger output temps. Now all that said, here's a quote from the STS FAQ's that might shed some light:
What intake air temps do you get?
Intake Air Temps are a function of several variables. Ambient temps and Boost levels drastically affect IAT's. Most of our turbo systems get at least 50% Intercooler efficiency with 1/4 to 3/4 of a pound pressure drop. The actual numbers vary with our different kit applications as different vehicles have different air flow characteristics and lengths and diameters of tubing. In most cases, our 50% efficiency is comparable to about 70% efficiency with a 2-3 psi pressure drop across an intercooler.
...End quote...
My experience with super/turbochargers says that an IC doesn't do much good if you're gonna run below about 8 psi boost, because the output temps of the charger are not nearly as high at that level. Above that, an IC can do significantly more good in terms of less knock retard and more timing for the same octane (that can really help out). The big problem is that the relationship between boost and output temp isn't linear, that is, a 10% jump in boost can make a 20%-40% rise in temp. Now all this is a generalization and each setup is different, so there will be some exceptions to the rule.
HTH.
Some food for thought though. Boost and IC'd boost is a balancing act. A good IC will cost at least 2 psi at the TB. That's well worth it if your temps are out of hand (200 degrees), because the IC should drop 200 degree air down to about 100 degrees. The problem is that to get the same boost at the TB, you've got to raise the boost at the charger, which raises the charger output temps. Now all that said, here's a quote from the STS FAQ's that might shed some light:
What intake air temps do you get?
Intake Air Temps are a function of several variables. Ambient temps and Boost levels drastically affect IAT's. Most of our turbo systems get at least 50% Intercooler efficiency with 1/4 to 3/4 of a pound pressure drop. The actual numbers vary with our different kit applications as different vehicles have different air flow characteristics and lengths and diameters of tubing. In most cases, our 50% efficiency is comparable to about 70% efficiency with a 2-3 psi pressure drop across an intercooler.
...End quote...
My experience with super/turbochargers says that an IC doesn't do much good if you're gonna run below about 8 psi boost, because the output temps of the charger are not nearly as high at that level. Above that, an IC can do significantly more good in terms of less knock retard and more timing for the same octane (that can really help out). The big problem is that the relationship between boost and output temp isn't linear, that is, a 10% jump in boost can make a 20%-40% rise in temp. Now all this is a generalization and each setup is different, so there will be some exceptions to the rule.
HTH.
#6
12 Second Truck Club
Join Date: Oct 2002
Location: Salt Lake City, Utah
Posts: 1,677
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TeeKay
Boost and IC'd boost is a balancing act. A good IC will cost at least 2 psi ath the TB. That's well worth it if your temps are out of hand (200 degrees), because the IC should drop 200 degree air down to about 100 degrees. The problem is that to get the same boost at the TB, you've got to raise the boost at the charger, which raises the charger output temps. Now all that said, here's a qulte from the STS FAQ's that might shed some light:
What intake air temps do you get?
Intake Air Temps are a function of several variables. Ambient temps and Boost levels drastically affect IAT's. Most of our turbo systems get at least 50% Intercooler efficiency with 1/4 to 3/4 of a pound pressure drop. The actual numbers vary with our different kit applications as different vehicles have different air flow characteristics and lengths and diameters of tubing. In most cases, our 50% efficiency is comparable to about 70% efficiency with a 2-3 psi pressure drop across an intercooler.
My experience with super/turbochargers says that an IC doesn't do much good if you're gonna run around 6-8 psi boost, because the output temps of the charger are not nearly as high at that level. Above that, an IC can do significantly more good in terms of less knock retard and more timing (that can really help out).
HTH.
What intake air temps do you get?
Intake Air Temps are a function of several variables. Ambient temps and Boost levels drastically affect IAT's. Most of our turbo systems get at least 50% Intercooler efficiency with 1/4 to 3/4 of a pound pressure drop. The actual numbers vary with our different kit applications as different vehicles have different air flow characteristics and lengths and diameters of tubing. In most cases, our 50% efficiency is comparable to about 70% efficiency with a 2-3 psi pressure drop across an intercooler.
My experience with super/turbochargers says that an IC doesn't do much good if you're gonna run around 6-8 psi boost, because the output temps of the charger are not nearly as high at that level. Above that, an IC can do significantly more good in terms of less knock retard and more timing (that can really help out).
HTH.
#7
TECH Apprentice
Join Date: Jan 2004
Location: Frisco TX (Dallas Area)
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
Quote: A turbo will automatically keep the boost level in the manifold the same with the wastegate only cracking when the preset boost level is met. So 10psi boost at 170 degrees is significantly less air than 10 psi at 100 degrees. Adding an intercooler on a turbo system will give you huge gains.
Black Blown, you're absolutely right, at 10 psi (and up) an IC can give you great gains! Just remember, though, to keep the same MAP, the turbo has to blow harder through an IC and the output temp of the compressor WILL rise. That's just physics.
Black Blown, you're absolutely right, at 10 psi (and up) an IC can give you great gains! Just remember, though, to keep the same MAP, the turbo has to blow harder through an IC and the output temp of the compressor WILL rise. That's just physics.
Trending Topics
#8
12 Second Truck Club
Join Date: Oct 2002
Location: Salt Lake City, Utah
Posts: 1,677
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TeeKay
Quote: A turbo will automatically keep the boost level in the manifold the same with the wastegate only cracking when the preset boost level is met. So 10psi boost at 170 degrees is significantly less air than 10 psi at 100 degrees. Adding an intercooler on a turbo system will give you huge gains.
Black Blown, you're absolutely right, at 10 psi (and up) an IC can give you great gains! Just remember, though, to keep the same MAP, the turbo has to blow harder through an IC and the output temp of the compressor WILL rise. That's just physics.
Black Blown, you're absolutely right, at 10 psi (and up) an IC can give you great gains! Just remember, though, to keep the same MAP, the turbo has to blow harder through an IC and the output temp of the compressor WILL rise. That's just physics.
#9
Do yall think that a powerstroke, cummins, or duramax factory intercooler could work? People are usually willing to almost give them away after they upgrade to a banks kit, hypermax IC or ATS IC. If it would work be a nice cheap upgrade.
#10
TECH Addict
Join Date: Nov 2001
Location: Bellevue, Wa
Posts: 2,651
Likes: 0
Received 0 Likes
on
0 Posts
that IC is "rated" don't know if it's true or not at ".2psi loss at 15psi, and 1000cfm, supports 800hp"
if that is anywhere near true it shouldn't make the turbo work much harder at all.
if that is anywhere near true it shouldn't make the turbo work much harder at all.