Ebay lt headers.. Problem!
#1
Teching In
Thread Starter
Join Date: Mar 2011
Location: Bakersfield ca.
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Ebay lt headers.. Problem!
The header is burning my wires from cylinder 5&7 i went to calspeed with jim and i got the msd wires with boots so the wires wouldnt burn but 6months later well 2day the same wires and the boots burn?? Wtf any one else have this problem??
#3
Baltimore Whore
iTrader: (95)
Join Date: Apr 2004
Location: In a van DOWN BY THE RIVER
Posts: 16,820
Likes: 0
Received 2 Likes
on
2 Posts
Roll the dice when you buy cheapy stuff.. None the less it has been a issue, there are some threads floating around, about brackets people have made that hold them wires away from the tubes, so they do not burn.. Just do a search for it
Trending Topics
#9
Teching In
Thread Starter
Join Date: Mar 2011
Location: Bakersfield ca.
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
i was thinking zip ties also...when i just had slaped on the lts i zipd tied the oem wires but they still wr touching ill c if i can do somthing diffrent with the zip ties
#10
PT's Slowest Truck
iTrader: (19)
You burning them by the primary hump? Some guys have made some cool little metal brackets and bolted them to the head, while others have used zip ties, and some use the sleeves that slide over the wires, this has been a problem for years since Dynatech had that design, and is easily remedied