Ebay lt headers.. Problem!
03-29-2011, 07:25 PM
#12
TECH Regular
iTrader: (8)
Join Date: Jan 2011
Location: logansport, LA
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
ye i have this problem to, but i have pacesetter headers. So its not just ebay headers, still trying figure something out, but if you do let me know. Its my boot that touching not the wire itself.
03-29-2011, 07:56 PM
#15
Dude my #5 JBA wire burned up even with a heat wrap sock on it. #7 is still good but I don't know for how long...so far so good.
If you buy a set house brand wires at Autozone the #5 is long enough to wrap around the hump with no problems...dunno about 7 yet.
If you buy a set house brand wires at Autozone the #5 is long enough to wrap around the hump with no problems...dunno about 7 yet.
03-29-2011, 10:28 PM
#18
On The Tree
iTrader: (1)
Join Date: Nov 2005
Location: Fort Dix, Dirty Jerzey
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
yeah I made two longer wires... and routed them out of the way MSD wires bend at the boot and the GMPP wires which are better than the MSD's they bend too
03-30-2011, 05:39 PM
#20
Mine have been on for my truck for 16+ months so far.
My "temporary" fix is still there, working great. No show truck here, so no worries.
I used a small section of the heat wrap that is used to insulate turbochargers on big construction/industrial equipment. My wires are, and always have been, right against the header tube...
My "temporary" fix is still there, working great. No show truck here, so no worries.
I used a small section of the heat wrap that is used to insulate turbochargers on big construction/industrial equipment. My wires are, and always have been, right against the header tube...