Exhaust system whores in here...
#23
TECH Fanatic
iTrader: (1)
Join Date: Feb 2011
Location: League City,TX
Posts: 1,309
Likes: 0
Received 0 Likes
on
0 Posts
I know there's some of you guys who change exhaust probably more often than your drawers..... So.... I'm looking to put something together for my Reg cab setup. I'll be putting the motor in with a set of Pacesetters just to get it running and changing to TSP 1-7/8 headers later on. The new setup will definitely require a dual 3" system but I want this thing like super crazy stealth ninja quiet I want to be able to idle thru a parking lot without little kids holding their ears and scaring old people (as fun as that stuff is, I'm not 17 anymore lol)
I want a nice tone, as little drone as possible and as much flow as possible, all with as few db's as I can make. I'll be running full exhaust at the track too.
First thought was to put 2 or 3 magnaflows on each bank and bring the exhaust right past the axle, but I think what I want can be done without 6 mufflers lol. Maybe bullets at the collectors, then into a 30" magnaflow and a 14"er behind the axle on each side?
Let me know what you've got put together, how it sounds, clips if possible, pics of how it's routed would help too. Lemme know... Thanks
I want a nice tone, as little drone as possible and as much flow as possible, all with as few db's as I can make. I'll be running full exhaust at the track too.
First thought was to put 2 or 3 magnaflows on each bank and bring the exhaust right past the axle, but I think what I want can be done without 6 mufflers lol. Maybe bullets at the collectors, then into a 30" magnaflow and a 14"er behind the axle on each side?
Let me know what you've got put together, how it sounds, clips if possible, pics of how it's routed would help too. Lemme know... Thanks
I'm looking into doing headers, 3inch ORY to 4inch pipe not sure of muffler yet then out the back.
here is a link with some pictures of it done on a singlecab. Looks good! Not too loud either.
"4 exhaust??
#27
TECH Fanatic
iTrader: (47)
Join Date: Oct 2008
Location: 714
Posts: 1,715
Likes: 0
Received 0 Likes
on
0 Posts
I am running 4 16" mufflers, now with cats and it sounds pretty good. there is room for bigger mufflers, too.
i have a pair right after the x pipe on edge and then two more tucked up behind the bumper.
i have a pair right after the x pipe on edge and then two more tucked up behind the bumper.
#30
Thanks
I've been considering putting two bullets at the collectors, a ginormous DI/DO mag with the internal X and two more 18" or so long at the rear of the truck. The exit will be done similarly to Corey's posted above just because I'm unoriginal and his is pretty clean looking. LOL
I've been considering putting two bullets at the collectors, a ginormous DI/DO mag with the internal X and two more 18" or so long at the rear of the truck. The exit will be done similarly to Corey's posted above just because I'm unoriginal and his is pretty clean looking. LOL