FAST or Victor jr LS1 intake ..
#42
TECH Senior Member
iTrader: (6)
Join Date: Jul 2005
Location: Decatur, AL
Posts: 5,257
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TurboBerserker
8ALTING --
This is what you are doing?
Summit
What else is required? $318 for 3500-7500 and capable of 600 NA hp sounds too good to be true... It says you need aftermarket rails -- probably the edelbrock variety
This is what you are doing?
Summit
What else is required? $318 for 3500-7500 and capable of 600 NA hp sounds too good to be true... It says you need aftermarket rails -- probably the edelbrock variety
#43
I AM A MOTHERF*CKER
iTrader: (1)
Originally Posted by Slowhawk
That's the one.We are getting it with there fuel rails and adding car style 60lb injector's/rewiring the injector plugs. It will have a sheetmetal 90' and a 90mm TB. For a Turbo vehicle lowend won't be affected. On a NA vehicle I wouldn't run this unless it has big CI.
On high boost vehicles #7 and #8 cylinders alway's run leaner than the rest.This is due to the air being forced to the back of the intake.Not really a problem till you push high boost though.
On high boost vehicles #7 and #8 cylinders alway's run leaner than the rest.This is due to the air being forced to the back of the intake.Not really a problem till you push high boost though.
Assuming this is DBW, what are you planning on doing for the harness?
Will you be offering the 90* bend? I've been thinking about fabbing one, but heck... if you're gonna do it...
#45
TECH Fanatic
iTrader: (7)
Join Date: Mar 2004
Location: NC
Posts: 1,028
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 8ALTNG
Turbo~ Im not sure if Don is going to fab up the 90* or if we are goign to buy one. I think that you can but them. GMC SKI had given me the name of someone that mankes them but I lost it
Last edited by Yellowsierra; 01-25-2006 at 09:37 PM.
#47
TECH Senior Member
iTrader: (6)
Join Date: Jul 2005
Location: Decatur, AL
Posts: 5,257
Likes: 0
Received 0 Likes
on
0 Posts
Here is some elbows.
http://www.youngsperformance.com/ind...duction&page=2
They have fuel rails as well I think.
http://www.youngsperformance.com/ind...duction&page=2
They have fuel rails as well I think.
#50
I AM A MOTHERF*CKER
iTrader: (1)
Originally Posted by quicksilverado
They are on sale with the fuel rails. Check this thread out
https://ls1tech.com/forums/showthread.php?t=432621
https://ls1tech.com/forums/showthread.php?t=432621
It's the same price summit offers everyday, though. $399 with rails.
The thread talks about a wilson 90* elbow for $240.