Flo-Pro Mufflers
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: May 2005
Location: Jacksonville, FL
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Flo-Pro Mufflers
Hey everyone, I'm a newb that needs a sound clip of a Flo-Pro muffler. I've read that the members that have them here on the board swear by them. I was looking at the Oval HD for my Denali. Any opinions?
#2
Launching!
Join Date: May 2005
Location: In a van, down by the river
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
I've got the FloPro 2503 dual in / single out with a Corsa dual outlet tip. I was disappointed at first because it sounded quieter than stock, but after about a thousand miles it's got a nice burble on the outside under a load. I don't hear the exhaust over the sound of the engine in the cab.
I really wanted the Corsa, but they don't make one for my truck. But I highly recommend the FloPro against the Magnaflow and the Flowmaster if you want to be able to carry on a conversation at a 75 mph cruise and not hear the exhaust drone or have to turn down the radio.
I really wanted the Corsa, but they don't make one for my truck. But I highly recommend the FloPro against the Magnaflow and the Flowmaster if you want to be able to carry on a conversation at a 75 mph cruise and not hear the exhaust drone or have to turn down the radio.
#3
13 Second Truck Club
Join Date: May 2004
Location: East Texas
Posts: 774
Likes: 0
Received 0 Likes
on
0 Posts
Where are you located? You may find someone close that you can take a ride with to see for yourself how you like it.
I have the FloPro HD 2503 with headers and high flow cats and I love it. Its quiet when you need it to be and loud when you want it to be. NO RESONANCE.
I have the FloPro HD 2503 with headers and high flow cats and I love it. Its quiet when you need it to be and loud when you want it to be. NO RESONANCE.
#6
On The Tree
iTrader: (2)
Join Date: Sep 2004
Location: Eastern NC
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
Did any of you with the flo-pro 2503 notice any power gains? I am looking at the flo-pro because I don't want a loud setup (drone), want something I can weld in place of the factory muffler leaving the rest of the system stock, and get better flow which should help in the HP department. I also hope it gets rid of the "noises" that the factory muffler is making on my truck (metal/metal sound and loud popping when it cools).
Trending Topics
#8
TECH Veteran
iTrader: (8)
Originally Posted by nativetexan
Where are you located? You may find someone close that you can take a ride with to see for yourself how you like it.
I have the FloPro HD 2503 with headers and high flow cats and I love it. Its quiet when you need it to be and loud when you want it to be. NO RESONANCE.
I have the FloPro HD 2503 with headers and high flow cats and I love it. Its quiet when you need it to be and loud when you want it to be. NO RESONANCE.
What he said.
I have the dual in single out.I had tried about 8-9 muffler combos before this,Its the last time i need to change.My buddies Denali has a dual/dual out each side behind the tires and spendy tips,his is awesome,I would do mine like that all over again.I punched his Denali up with H&C AZ speeds,UPD,Ls1 edit,2600 yank.He has put a million flawless miles on it.Hasnt skipped a beat.Go flopro if you dont like drone and a little stealthy.
#9
On The Tree
Thread Starter
iTrader: (1)
Join Date: May 2005
Location: Jacksonville, FL
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
I was planing on using the exisiting piping and just changing out the muffler and tip. I will probably update the y-pipe later with some long tubes. I've had many exaust systems in the past that killed low end and caused drone, which with a 7000lb vehicle I would like to have as much low end as I can. I'm really happy to not have any drone.
#10
13 Second Truck Club
Join Date: May 2004
Location: East Texas
Posts: 774
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by curlyws6
Did any of you with the flo-pro 2503 notice any power gains? I am looking at the flo-pro because I don't want a loud setup (drone), want something I can weld in place of the factory muffler leaving the rest of the system stock, and get better flow which should help in the HP department. I also hope it gets rid of the "noises" that the factory muffler is making on my truck (metal/metal sound and loud popping when it cools).