02Reaper

iTrader: (2)

would I gain anything (what) from some 1.85 rockers on a 5.3 with a comp 212/218 .522 .529 114. The cam has been installed for a while now and I can get some of the slp rockers for cheap from a friend.

Black Blown 02

I think with a stock cam, people see 10-20 rwhp. With an aftermarket cam I don't know. Your springs are gonna have to be good for more lift though.

02Reaper

iTrader: (2)

I have comp 918's?

99Silver6.0

iTrader: (1)

Just get ya a bigger cam!

quicksilverado

iTrader: (8)

I put the 1.85s on the same time I put a set of gibson shorties on. I could feel a pretty good difference from bottom to top end.

one03sierra

iTrader: (1)

i am putting 1.85's on mine. it has the 216-220-525-532-114. they are saying it will be near 568-572 after the rockers.

here check this out.

http://www.thedirtforum.com/rockercalc.htm

02Reaper

iTrader: (2)

I am really impressed with this cam. just trying to get another 15-20 hp under my belt since I wont be installing the TEA ported heads.

Ryan04Silverado

Not to hijack the thread, but would the 1.85 rockers work with stock springs and stock cam and show some good gains?? I dont want to break into the motor, so I was thinking this might be an easy way of getting a few extra horsies.

Thanks in advance for any info.

ThunderZ28

iTrader: (7)

they will help you rev quicker.
I put them on my stock cam and springs, and picked up about a 1/10 to 2/10 at the track
not bad for a simple bolt on, plus the changed the lift of the cam a bit, and gave the stock cam a little bit of a lope

99Silver6.0

iTrader: (1)

I hear ya man. Just giving ya a hard time.