GM Truck Turbo Kit - Free Installation
#1
LS1TECH, Trucks, Modmotor Sponsor
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Location: Dearborn Heights, MI
Posts: 923
Likes: 0
Received 0 Likes
on
0 Posts
GM Truck Turbo Kit - Free Installation
We are currently looking for GM 4.8, 5.3, & 6.0L Trucks for use to do additional R&D and test fitting on Detroit Speedworks Truck Turbo Kit. We are looking for one 98-01 1500 Silverado, Silverado SS, or Sierra and one 02+ 1500 Silverado, Silverado SS, or Sierra. We know it fits Cadillac Escalade, Escalade EXT, and Tahoe vehicles, but would also consider a '98-01 and '02+.
This kit is complete and includes:
Dual 4 into 1 Tubular Headers w/ 1 5/8" primaries, 1/2" Laser Cut Header Flanges, 2 1/4" Cross Over, 3" Down Pipe, Powder Coated Inlet Tubes, All V-Band Connections, High Quality Silicone hoses w/ Aircraft Grade SS clamps, Tial 38mm Billet Wastegate, and complete detailed instructions.
* Bolt-on Installation; NO SHEETMETAL CUTTING OR WELDING required! Works with factory electronics.
The Battery, A/C, Power Steering, ABS, etc.. remain in the factory locations, so you could put your car back to stock, very easily at any time.
Pricing would be $5,995.00 for the kit + $300 for a shift kit. Labor to install the turbo kit and shift kit is free as is tuning after the installation is complete.
The turbo is a GT-37 with a custom exhaust housing, however upgrades are available.
We would like to get a vehicle within the next few weeks and need somebody thats going to be somewhat patient and not want the vehicle back within a week. We want to make sure the clearances and everything else is perfect before these kits ship.
We are located in Dearborn Heights, MI (near Detroit)
We've seen decent gains with the kit on the Escalade at only 5 lbs. Stock it ran 16.8 @ 80 mph and with 24 inch wheels and a lot of heavy stereo equipment it ran 14.2 @ 94 mph.
Below you will find photos of the kit installed on a 2003 Cadillac Escalade
Click here to see the truck in action. Note: This is at 5 lbs. of boost.
Click Here
Thank you
Regards,
Rick LeBlanc
Livernois Motorsports
This kit is complete and includes:
- Polished Garrett Turbo
- Black Powder Coated Inlet Tubes
- Black Satin Ceramic Coating on Hot Parts
- 42 lb Injectors
- 3 Core Air-to-Air Intercooler
Dual 4 into 1 Tubular Headers w/ 1 5/8" primaries, 1/2" Laser Cut Header Flanges, 2 1/4" Cross Over, 3" Down Pipe, Powder Coated Inlet Tubes, All V-Band Connections, High Quality Silicone hoses w/ Aircraft Grade SS clamps, Tial 38mm Billet Wastegate, and complete detailed instructions.
* Bolt-on Installation; NO SHEETMETAL CUTTING OR WELDING required! Works with factory electronics.
The Battery, A/C, Power Steering, ABS, etc.. remain in the factory locations, so you could put your car back to stock, very easily at any time.
Pricing would be $5,995.00 for the kit + $300 for a shift kit. Labor to install the turbo kit and shift kit is free as is tuning after the installation is complete.
The turbo is a GT-37 with a custom exhaust housing, however upgrades are available.
We would like to get a vehicle within the next few weeks and need somebody thats going to be somewhat patient and not want the vehicle back within a week. We want to make sure the clearances and everything else is perfect before these kits ship.
We are located in Dearborn Heights, MI (near Detroit)
We've seen decent gains with the kit on the Escalade at only 5 lbs. Stock it ran 16.8 @ 80 mph and with 24 inch wheels and a lot of heavy stereo equipment it ran 14.2 @ 94 mph.
Below you will find photos of the kit installed on a 2003 Cadillac Escalade
Click here to see the truck in action. Note: This is at 5 lbs. of boost.
Click Here
Thank you
Regards,
Rick LeBlanc
Livernois Motorsports