RED2K

My machine Shop that has built my motors for the last couple of years cut me a hell of a deal on a rebuild for the truck. $450 They said they would do a valve job, grind the crank, bore w/ torque plate, deck the block , mill the heads, file fit the rings, and put the bitch together for that. I thought That sound pretty damn good and asked them why they would so cheap and then they showed my what I have spent over the years there. Then I thought they should do the whole damn thing for free. A bit of advice to any person wanting to get into roundy round cars, DONT. You will pop motors no matter how good they are. The damn sport will also nickel and dime you to death. I could have a brand new truck fully paid for, for what i have spent on just damn motors. <img border="0" alt="[bang head]" title="" src="graemlins/gr_banghead.gif" />

hyde

Well I think no other people on this site are as gay as you, So you don't have to worry about it...That rebuild is useless if you do not put good pistons and rods, and then the rebuild will not be 450

RED2K

Hyde you are a true brick. That doesnt include the parts. pistions are $630 and Arp bolts cost so much and one. I am talking about machine work and putting it together jackass

Snake Eater

<img border="0" alt="[punch]" title="" src="graemlins/gr_punch.gif" /> <img border="0" alt="[punch]" title="" src="graemlins/gr_punch.gif" /> <img border="0" alt="[punch]" title="" src="graemlins/gr_punch.gif" /> <img border="0" alt="[punch]" title="" src="graemlins/gr_punch.gif" /> <img border="0" alt="[punch]" title="" src="graemlins/gr_punch.gif" />

Snake Eater

<img border="0" alt="[punch]" title="" src="graemlins/gr_punch.gif" /> <img border="0" alt="[punch]" title="" src="graemlins/gr_punch.gif" /> <img border="0" alt="[punch]" title="" src="graemlins/gr_punch.gif" /> <img border="0" alt="[punch]" title="" src="graemlins/gr_punch.gif" /> <img border="0" alt="[punch]" title="" src="graemlins/gr_punch.gif" />

Ryan23silverado

iTrader: (1)

What is the difference between H-beam and I-beam rods? JE is a proven piston, how about forged Ross or Diamond pistons?

hyde

H-beams are stronger, and new technology, I beams are normally good to about 600, where h-beams can be good to 1100 plus

hyde

Well then you need to call Mix he can get the pistons for like 400...And you need to put rods not those ******* junkers back in....

RED2K

What kind of pistons and does cussing make you feel cool? I know it does me <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

hyde

JE/SRP, and get H-beam rods, with upgraded rod bolts....