Group Purchase on A.R. Headers!!!
#41
We normally see between 20 and 30rwhp and aproximately 25ft-lbs of tourque most of our data has been with 6.0,6.2 engines though but we think the gains should be similar
#43
what a rush!
iTrader: (8)
There will be no 2" primary unless your making nearly 1000hp or have a 450+ cubic inch LSX you'll be fine with a 1-7/8's we have supercharged corvettes with a 1-7/8's system making 1000hp. It's a short primary around 23" so unless your combo is very extreme you should be fine with the 1=7/8's
#48
What exactly due you want to know I think we got the ten sets we were looking for plus or minus 1 or 2 I honestly don't remember and I do the board surfing from home.
The horror house is about a mile from the shop so we're safe, or are WE
The horror house is about a mile from the shop so we're safe, or are WE
#49
TECH Fanatic
Join Date: May 2004
Location: Cibolo Tx
Posts: 1,087
Likes: 0
Received 0 Likes
on
0 Posts
The original movie was pretty good.
#50
TECH Apprentice
iTrader: (6)
Join Date: May 2005
Location: Las Vegas NV, Chicago Il
Posts: 317
Likes: 0
Received 1 Like
on
1 Post
I was asking in hopes this might go down again. I am going to be ordering a set here soon and was a bit late to get on the GP train this time. So I was seeing if it was worth waiting to try and grab em up again a little later on.