guys with a single 4 inch exhaust
#36
TECH Resident
Thread Starter
Join Date: Dec 2006
Location: Enid, OK
Posts: 870
Likes: 0
Received 0 Likes
on
0 Posts
I could always make my own out of some 1/4 inch plate but that may be more work then its worth. I could even do a slip together pipe joint and a band clamp for that matter.
Ha found one on ebay.
http://cgi.ebay.com/ebaymotors/FLANG...Q5fAccessories
Looks to be 10 bucks per flange so it will take two but still thats not bad for the amount of time it would save. A piece of plate big enough to cut two flanges out of would probably cost at least 10 bucks.
Ha found one on ebay.
http://cgi.ebay.com/ebaymotors/FLANG...Q5fAccessories
Looks to be 10 bucks per flange so it will take two but still thats not bad for the amount of time it would save. A piece of plate big enough to cut two flanges out of would probably cost at least 10 bucks.
Last edited by oldred95; 10-17-2010 at 05:24 PM.
Thread
Thread Starter
Forum
Replies
Last Post
lxcoupe
FORCED INDUCTION
8
07-21-2015 02:12 AM