GM Engine & Exhaust Performance EFI | GEN I/GEN II/GEN III/GEN IV Engines |Small Block | Big Block |

hand held programers??

Thread Tools
 
Search this Thread
 
Old 09-07-2004 | 11:37 PM
  #1  
SierraSlow's Avatar
Thread Starter
Teching In
 
Joined: Jul 2004
Posts: 24
Likes: 0
Default hand held programers??

who has any experience with these,predatator or crane cams version.i have a 04 ecsb 4wd 5.3 truck.
Old 09-08-2004 | 06:31 AM
  #2  
wkdivr's Avatar
TECH Fanatic
iTrader: (8)
 
Joined: Oct 2003
Posts: 1,760
Likes: 0
From: I like BoomBoom !!
Thumbs up

Originally Posted by SierraSlow
who has any experience with these,predatator or crane cams version.i have a 04 ecsb 4wd 5.3 truck.

I have a programmer called "Proflash" from Street & Performance Electronics, and like it a lot. Easy to use, and you can change back and forth between different tunes to suit your tastes. The part # is: 200325 for 04 GMC. You can check out their website at www.wickedspeed.com. Get in touch with Sky, he'll help you out. I also think the Predator is good, too. Same thing with Crane. With me, it finally came down to price, since they all seem to do about the same things. With Predator, you can buy optional pieces to be able to download custom tunes from their customer service site, for a fee. With Crane, you can do some extra adjusting for their cams. Check out the Proflash, I think for the price, and if you're only going to do small mods, it's a good deal.
Old 09-08-2004 | 09:54 PM
  #3  
SierraSlow's Avatar
Thread Starter
Teching In
 
Joined: Jul 2004
Posts: 24
Likes: 0
Default

anybody else?
Old 09-08-2004 | 09:57 PM
  #4  
F8L Z71's Avatar
12 Second Truck Club
 
Joined: Feb 2002
Posts: 5,575
Likes: 0
From: Sacramento, CA
Default

Only experieance I have had was with Hypertech and at first I thought it was kinda cool till I relaized I didn't gain much from it other than modified shift points.

IMO I'd get something that allows TQ managment removal or partial removal and timing adj. in case you decide to run nitrous later.

I think the overwhelming response here will be to spring for a custom tune.
Old 09-08-2004 | 10:05 PM
  #5  
chevymec's Avatar
TECH Resident
iTrader: (19)
 
Joined: Jul 2004
Posts: 980
Likes: 15
From: Richlands N.C.
Default

I got a predator from Ebay new for $325. Got it, didn't do much for me so I contacted Johan at Diablosprt and he made me a new tune at no cost since I was having a problem. Ran with 3/4 tank more than before and did a bit better so I would say if I ran with 1/4 tank like before it did help. I like the options with the Predator. This is the nioly programmer that I have delt with . Easy to use and takes no time to use. Also like the Live data. Having to use high octane gas doesnt really bother me cause its not really that much more than 87 here.
Old 09-08-2004 | 10:51 PM
  #6  
SierraSlow's Avatar
Thread Starter
Teching In
 
Joined: Jul 2004
Posts: 24
Likes: 0
Default

does the predator allow for torque management removal?i have installed a transgo kit with a corvette servo.
i have tryed a custom tune the results were not worth the money.
Old 09-09-2004 | 12:40 AM
  #7  
On The Tree
 
Joined: Sep 2003
Posts: 118
Likes: 0
From: bay area california
Default

theres no option to remove TM but they will send you a custom tune to whatever you would like at no charge I have had them send me about 20 different tunes for all the diffent mods I have made and im pretty happy with them
Old 09-09-2004 | 10:38 PM
  #8  
Teching In
 
Joined: Aug 2004
Posts: 30
Likes: 0
From: Pittsburgh, Pa.
Default

I know you can change the shift points and the firmness of the shifts with the Diablo Predator. I also thought you could remove the TQ managment but I guess I was wrong.
Old 09-09-2004 | 10:41 PM
  #9  
Teching In
 
Joined: Aug 2004
Posts: 30
Likes: 0
From: Pittsburgh, Pa.
Default

Never mind, I guess you can't remove the TQ managment with the hand held programer. I just checked their website and that was not listed as one of the things you can do. But you can raise the top speed limiter.
Old 09-09-2004 | 10:46 PM
  #10  
koochingchang's Avatar
Teching In
 
Joined: Aug 2004
Posts: 19
Likes: 0
From: Houston
Default

I've also got the SPE Proflash and really like it. Do a little search on Fullsizechevy.com for it and you will find alot. A guy on the board over there helped make it and one sells it for a real good price. It allows for the types of tuning, octane, shift points, and firmness. It also removes tqm according to the tunes.


Quick Reply: hand held programers??



All times are GMT -5. The time now is 08:31 PM.