help wit RADIX 4.8 hp numpers please
#11
13 Second Truck Club
iTrader: (1)
Join Date: Mar 2003
Location: Pueblo de Nuestra Señora la Reina de los Ángeles de la Porciúncula
Posts: 4,094
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by LTNKLR01
ya i have a 4.8 with a radix. I made 435rwhp with 10lb of boost and went 12.6 @110 in the 1/4 with practically no 3rd gear. but one work a advice. Dont expect the pistons to last too long when pushin that kind of power. Then you have to go and build a forged short block for the stupid thing and throw some nos on it.
#13
TECH Enthusiast
Join Date: Dec 2003
Location: Western WA
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
i have an '03 rcsb 4wd with the 4.8 and the intercooled radix. pre-radix dyno (mods then were jba headers, flowmaster 70 exhaust, k/n air filter, and electric fans) got 240 rwhp and 250 torque. post radix was 314 rwhp and 320 torque, a bit on the low side, if you ask me. two possible factors for the low numbers: a very modest 3.7" pulley on the blower, and the fm70's are choking the system. i had problems with them at 4000+ rpms when n/a, and now with the blower, it has gotten worse. planning to go to magnaflows.
Thread
Thread Starter
Forum
Replies
Last Post
legerwn
Tuning, Diagnostics, Electronics, and Wiring
56
11-15-2015 10:21 PM