James also help me put the engine all together on quite a few Saturdays too...also made a new pressure 180 tube for me...which I need to pickup....James when you want to work on the other side?

Thanks again James!

Ken

 

Right now I am running the bigger pulley and should be able to fuel it with Ed Wrights programing, MAFT+ and a Vortech Super FMU which can now run up to 100psi with the new factory upgrade injectors that get rid of the poppet valves....



Will add the extra injectors (still just two) when I get moved into the new house so I can add the smaller pulley. MF2 is like the SuperFueler unit.

Oh, here is the shop that build my engine...they rate it up to 640HP I got the complete short block but I supplied some of my own parts like the fluid dampner, flexplate, cam, timing chain.

http://www.wheelermotorsports.com/en...83/prices.html

Ken

 

(Ken)-96GMC K1500 SC: you've got mail

 

Thats one mean f*ckin truck. After you whoop a ricer's ***, you can turn around and run over it! I love it!

 

got almost 500 miles on the engine...jumped on it from 10 mph to midway in 2nd gear and it flat out hauls! Very smooth...sound really good! Still need to take it easy on it though until I get moved this weekend to our new house in Hemet.

Oh, I did get pulled over today by a CHP (truck unit) though! I was getting on the 60 freeway at Pegion Pass at the stop and spun the tires a couple of feet on take off....older chp officer said I was going WOT! I told him I just installed the engine and that I was only applying 20% throttle which may be WOT on a stock truck though LOL! He also said my tinted windows were a no-no and that it is not a fix it ticket but $130 now! He looked over my truck and I guess he saw the SC emblem on the fender...he let me off with a warning...pays to be nice to these guys...not like city cops where you still get written up!

Ken

 

i was looking at trying this:



or this:



the first says vortec in the description, but shows different in the picture, still have to check on that yet. the second may take some machine work. trying to fuel this...