I know, I know, another hooker aerochamber question??
11-06-2005, 07:54 PM
#1
TECH Senior Member
Thread Starter
iTrader: (8)
Join Date: Sep 2004
Location: Houston, Texas
Posts: 6,411
Likes: 0
Received 0 Likes
on
0 Posts
I know, I know, another hooker aerochamber question??
I need to know if the hooker aerochamber is actually a straight thru design??? can somebody that has physically looked at one say that you CAN see from one side to the other??? hopefully I'll be ordering it tomorrow but I want to make sure it is a straight thru desgin....
thanks...
thanks...
11-06-2005, 08:30 PM
#2
Originally Posted by ap2002
I need to know if the hooker aerochamber is actually a straight thru design??? can somebody that has physically looked at one say that you CAN see from one side to the other??? hopefully I'll be ordering it tomorrow but I want to make sure it is a straight thru desgin....
thanks...
thanks...
11-06-2005, 08:58 PM
#4
17,16,15,14,13,12,11 Drvr
iTrader: (10)
Join Date: Aug 2003
Location: Mont Belvieu, Texas
Posts: 6,713
Likes: 0
Received 0 Likes
on
0 Posts
ap2002 why worry about a muffler when you have the cut out lol, your truck sounds good now, you just need to work it better then you have it we were kinda confused about the set up lol
11-06-2005, 10:54 PM
#7
On The Tree
Join Date: Mar 2005
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
the Aerochamber is a straight thru muffler. If you take for example a 3"I/O on centers you can see straight through it, no baffles, yet its still a chambered muffler. The offset inlet & outlets you can't see straight through due to the internal case design, but they are a straight thru setup, especially if you go with a center in/center out.
BTW-they do make a single in/dual out
BTW-they do make a single in/dual out
Trending Topics
11-06-2005, 11:08 PM
#8
TECH Senior Member
iTrader: (1)
Join Date: Jan 2003
Location: Armpit of East TX
Posts: 9,342
Likes: 0
Received 0 Likes
on
0 Posts
They will flow as well as or better than any other muffler will.
On the offset, you can see through it, but obviously, since it's looking through it an an angle, it's not a straight shot. The center in/out would be a straight shot, but it's still baffled.
I got a sound clip in my sig for the Aero Chamber.
On the offset, you can see through it, but obviously, since it's looking through it an an angle, it's not a straight shot. The center in/out would be a straight shot, but it's still baffled.
I got a sound clip in my sig for the Aero Chamber.
11-06-2005, 11:57 PM
#9
TECH Enthusiast
iTrader: (68)
Join Date: Nov 2004
Location: Cleveland, TN
Posts: 707
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Flyer
They will flow as well as or better than any other muffler will.
On the offset, you can see through it, but obviously, since it's looking through it an an angle, it's not a straight shot. The center in/out would be a straight shot, but it's still baffled.
I got a sound clip in my sig for the Aero Chamber.
On the offset, you can see through it, but obviously, since it's looking through it an an angle, it's not a straight shot. The center in/out would be a straight shot, but it's still baffled.
I got a sound clip in my sig for the Aero Chamber.
11-07-2005, 01:16 AM
#10
TECH Senior Member
Thread Starter
iTrader: (8)
Join Date: Sep 2004
Location: Houston, Texas
Posts: 6,411
Likes: 0
Received 0 Likes
on
0 Posts
ok that clarify's alot, I will be getting the 3"centerin/3"centerout... 
I actually love the way the Borla sounds but I guess I just want a change in sound, and eversince I heard Flyer's clip months ago I've just been wanting to change... so Im going to go ahead and do it...
yeah kevin, I have a cutout but only like how it sounds @ idle and @ WOT... other than that the raspiness kills it...
I'll have the cutout for the track about the exhaust setup its a long story...lol.. lance asked about it too!! 
lotzafun & w41quad4 - yes, they have a single in/dual out but it is a 2.5"inlet/outlets in a small case.... that's why Im jus going with the 3"in/3"out
I actually love the way the Borla sounds but I guess I just want a change in sound, and eversince I heard Flyer's clip months ago I've just been wanting to change... so Im going to go ahead and do it...
yeah kevin, I have a cutout but only like how it sounds @ idle and @ WOT... other than that the raspiness kills it...
I'll have the cutout for the track about the exhaust setup its a long story...lol.. lance asked about it too!! lotzafun & w41quad4 - yes, they have a single in/dual out but it is a 2.5"inlet/outlets in a small case.... that's why Im jus going with the 3"in/3"out