bigguy75inches

hey guys, just thought id post a picture of my intercooler i finially got on my truck. ive been so busy the last 5 months, i havent had the time to tear into my truck like i wanted. Anyways, i removed the radiator and mounted the intercooler in its place. unforntuatly the intercooler was way to large to mound in front of the ac condenser so i have the intercooler sandwiched inbetween the ac condenser and the radiator. just hoping for some thoughts on the project and if you think the trouble im going through was worth it or not. lol.. probably not, but at least i got the first air to air intercooler i believe for a whipple!

**EDIT** I just attached the image as an attachment. XLR8NSS

bigguy75inches

if the pic aint workin,, just say so and ill email it to ya

Texas Terminator

not working. i would like to see it though. txiggy@comcast.net

bigguy75inches

what is the best way to post a picture?

bigguy75inches

maybe this will work

GREGGO

iTrader: (2)

I must have missed the boat on this. I see the pic fine, but would like to see it out of the truck and a little more infor on it.

Flyer

iTrader: (1)

Have you got anything fabbed up as far as piping goes yet?

bigguy75inches

my buddy works at a place that uses stainless 3 inch tubing... and he also has a mandrel bender so i got alot of deferent bends and pipe he gave me.. all i need to do is cut and tack the pieces together, then he will take and have it prof. welded and polished for me.

Flyer

iTrader: (1)

Cool ... Is 3 inch going to be big enough though? I was thinking the stock tubing is all 4 inch.

bigguy75inches

3 inch is the size coming out of the whipple. and should work great. here are some various pics of my installation so far. it shows the intercooler and radiator together.