Its been awhile....cam recommendation

Reply Subscribe

Thread Tools

Search this Thread

07-07-2011, 08:23 PM

#11

budhayes3

PT's Slowest Truck

iTrader: (19)

Join Date: Apr 2004

Location: Hackensack, NJ

Posts: 17,863

Likes: 0

Received 2 Likes on 2 Posts

Quote:

Originally Posted by Ackattack1

OK, so I Like the sounds of the Circle D 278mm 3000-3200 stall converter

sounds like maybe the TR 220-114 would be a good, slightly milder option.

With that cam, is it neccessary to get new push rods? Are the comp 918 springs the preffered springs with a "lower" lift cam like this one?

New pushrods aren't "necessary" but are recommended for some cheap insurance. With stock, unmilled heads, a good hardened 7.4 pushrod is usually what's recommended for the majority of the aftermarket cam offerings out there. As for valve springs, I would personally go with PAC 1218's over the Comp 918's as the Comps have had a bit of a bad track record with breakages, while the PAC's have been near perfect, at least they have on this forum