Lightning vs. Silverado
11-05-2003, 06:36 PM
#11
Devil welcome and let me commend you on your switch to the Chevy side. Put a magnacharger with heads and a good size cam in that 5.3 and you will eat L's all day long. With less displacment too!!! Its the best feeling to whip their *** and then have them ask you "is that a 6.0??"
11-05-2003, 07:14 PM
#12
TECH Junkie
Join Date: Mar 2003
Location: Katy, TX
Posts: 3,271
Likes: 0
Received 0 Likes
on
0 Posts
Ive got quite a few vidios killing lightnings. I love the 5.3 engines. I just wish I knew then what I know now, I would have done some different mods. Its not hard to pull on lightnings 0-80 with a few of the right mods.
11-05-2003, 10:05 PM
#14
TECH Enthusiast
Join Date: Dec 2002
Location: Fort Worth
Posts: 698
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by devildog92
I have a friend that builds Vettes as well as Lightnings (a very reputable tuner) telling me in order to get this truck to be a Lightning it will be WAY too expensive and it is an endeavor leading to failure .
[QUOTE=devildog92]I will most likely build a forged/built 6.0 down the road, but in the meantime I would like to go heads/cam, etc to get minimum 330rwhp. Please, QUOTE]
Ported 5.3 heads and a Comp 212/218 cam will give you 332rwhp, I have the dyno sheet to prove it. A Comp 212/218 cam in a bone stock 6.0 will give you 351rwhp, I have another dyno sheet to prove it. Add a Procharger and 11lbs of boost.
Good luck and welcome.
11-06-2003, 08:41 AM
#17
Teching In
Thread Starter
Join Date: Nov 2003
Location: Dallas TX
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=StupidFast]Really, I might know someone who can prove him wrong. I have not lost to a Lightning or Vette yet. Although, I have respect for both.
Are you serious?!?!?! 332 at the wheels? I guess the HP would be less if you went with a set of stg II LS1/6 heads, but better for the blower application, right? If I went with the ported 5.3 heads, where would be the best place to purchase them, then consequently is there a particular stage that I should look at over another (stg I instead of II, etc)?
Originally Posted by devildog92
I will most likely build a forged/built 6.0 down the road, but in the meantime I would like to go heads/cam, etc to get minimum 330rwhp. Please, QUOTE]
Ported 5.3 heads and a Comp 212/218 cam will give you 332rwhp, I have the dyno sheet to prove it. A Comp 212/218 cam in a bone stock 6.0 will give you 351rwhp, I have another dyno sheet to prove it. Add a Procharger and 11lbs of boost.
Good luck and welcome.
Ported 5.3 heads and a Comp 212/218 cam will give you 332rwhp, I have the dyno sheet to prove it. A Comp 212/218 cam in a bone stock 6.0 will give you 351rwhp, I have another dyno sheet to prove it. Add a Procharger and 11lbs of boost.
Good luck and welcome.
Are you serious?!?!?! 332 at the wheels? I guess the HP would be less if you went with a set of stg II LS1/6 heads, but better for the blower application, right? If I went with the ported 5.3 heads, where would be the best place to purchase them, then consequently is there a particular stage that I should look at over another (stg I instead of II, etc)?
Thread
Thread Starter
Forum
Replies
Last Post
therock
GM Drivetrain & Suspension
4
07-25-2015 09:23 AM
Offroadunleashed
Trucks and SUV Classifieds
0
07-20-2015 02:25 PM
