looking for a good machine shop for head work
#1
looking for a good machine shop for head work
ok first, i got a set of 862 heads for......free....!!
long story but I was wondering If anyone knows a good machine shop that could open them up, with bigger valves ect... in the dfw area or texas for that matter? I want more out of the 5.3, and I want it stealthy. so I want to send the heads off for work and find a z06 or equal cam, and r&r it all at the same time, so I am down a half day.
also, what all should be done, or what work should I ask for?
any advice, comments that are good or bad, or whatever, is welcome.
thanks
long story but I was wondering If anyone knows a good machine shop that could open them up, with bigger valves ect... in the dfw area or texas for that matter? I want more out of the 5.3, and I want it stealthy. so I want to send the heads off for work and find a z06 or equal cam, and r&r it all at the same time, so I am down a half day.
also, what all should be done, or what work should I ask for?
any advice, comments that are good or bad, or whatever, is welcome.
thanks
#6
TECH Fanatic
iTrader: (10)
Join Date: May 2007
Location: Fort Worth Texas
Posts: 1,759
Likes: 0
Received 0 Likes
on
0 Posts
The closest person around here is Lloyd Elliott. Hes in Red Oak. He did the heads that are on my motor right now. He hand ports and can machine for larger valves and can flow test them for ya... He always makes good power especially for the price... PM me and i can give ya his number.