Lq4 built and started!......somethings not right
#91
Launching!
Thread Starter
I was going to try and slam this thing back together in time for weekend buuuuuuut my crankshaft hasn't shipped yet =(
Its good to know I can reuse those gaskets.
Its good to know I can reuse those gaskets.
#96
Launching!
Thread Starter
I’m positive I had them plugged in. My wire harness for coils probably got damaged when I removed them from the bracket and painted the bracket. Wires were hard as a rock and didn’t want to bend or move. I’ll try a different set this time around.
#100
Launching!
Thread Starter
My cam specs are 218/222 on a 110+3 .587/.578 nothing major.
LY6 rods and pistons.
NNBS intake manifold
8.1l injectors
ls3 throttle body
pac racing springs
trunnion rocker upgrade
milled heads .030
comp cam push rods
shorty headers
How much horsepower you think this motor will make?
2600-2800 stall converter
4l80e
Ah man that sucks but nothing on these trucks is really hard to work on especially if you have already messed with everything at least once.
LY6 rods and pistons.
NNBS intake manifold
8.1l injectors
ls3 throttle body
pac racing springs
trunnion rocker upgrade
milled heads .030
comp cam push rods
shorty headers
How much horsepower you think this motor will make?
2600-2800 stall converter
4l80e
Ah man that sucks but nothing on these trucks is really hard to work on especially if you have already messed with everything at least once.
Last edited by willhorne22; 01-30-2020 at 03:45 PM.