ls-6 valves
#1
On The Tree
Thread Starter
Join Date: Feb 2009
Location: Houston
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
ls-6 valves
need some help deciding on the correct length pushrods. I have a LQ9 with a stock LS1 cam and 317 heads. I was gonna use a set of 243's but the valve seats had pits in them. so i took the valves and springs from the 243's to the 317's. how much longer are the hollow Z06 valves and can i use stock 7.4" pushrods. BTW just got the engine from the machine shop and they milled the block .005". thanks for any help!
#3
On The Tree
Thread Starter
Join Date: Feb 2009
Location: Houston
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
yeah a pushrod checker is gonna be a must. also i ordered the lifters alrady from gm and i have read all ls lifters are now ls7 lifters. from what i understand they have a different plunger height. thanks for the info.
Thread
Thread Starter
Forum
Replies
Last Post