LS6 fuel rails etc??
03-19-2006, 11:27 PM
#11
If I remember correctly the lines went off to the side of the drivers side. They aim toward the wheel well, instead of toward the firewall. I think it would be close, in reaching the lines. I was not sure on the vacume line. If my parts come in tomarrow, I will double check!
03-20-2006, 06:30 AM
#13
5 year bitches!
iTrader: (7)
Join Date: Oct 2003
Location: Pittsburgh!!!!!!!! Pa
Posts: 4,890
Likes: 0
Received 2 Likes
on
2 Posts
97/98 vette had a vaccum port on the regulator. its on mine and will be on any other. you can also swap out regulators for one off your truck if you had to. but it does have a vaccum port
03-20-2006, 09:33 PM
#14
Thanks for the info and pic's. They are alot of help. I just got back from the dealer and got part#'s 12556705 for the fuel rail and 12554677 for the regulator. I also got a hefty bill for $190. Just for ls1 intake gasket kit($89.13), longer bolts($66.60), and the bracket that holds the throttle cable+bolts it to the intake($19.00).
03-20-2006, 10:48 PM
#15
TECH Fanatic
iTrader: (3)
Join Date: Oct 2003
Location: Winston Salem NC
Posts: 1,612
Likes: 0
Received 0 Likes
on
0 Posts
was the powersteering pump bypassed in the pic?
if not ...how much wrap is that for the crank?
cant be enough
on the FPR
It looks like he's trying to pull vac from the elbow in front of the TB
where is this pulled from stock on a 97 vette?
if not ...how much wrap is that for the crank?
cant be enough
on the FPR
It looks like he's trying to pull vac from the elbow in front of the TB
where is this pulled from stock on a 97 vette?
03-21-2006, 12:09 AM
#16
No power steering bypass in the pic, but the vett does pull vac from the TB stock.
I was wondering how do you takeout the brass bosses in the plastic intakes. The part you screw into, on the intake. My ls1 intake is missing the bosses that the throttle linkage bracket bolt's to. I thought I could take the bosses out of the stock intake.
I was wondering how do you takeout the brass bosses in the plastic intakes. The part you screw into, on the intake. My ls1 intake is missing the bosses that the throttle linkage bracket bolt's to. I thought I could take the bosses out of the stock intake.
03-21-2006, 06:40 AM
#17
5 year bitches!
iTrader: (7)
Join Date: Oct 2003
Location: Pittsburgh!!!!!!!! Pa
Posts: 4,890
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by TURBO8
If I remember correctly the lines went off to the side of the drivers side. They aim toward the wheel well, instead of toward the firewall. I think it would be close, in reaching the lines. I was not sure on the vacume line. If my parts come in tomarrow, I will double check!
Thread
Thread Starter
Forum
Replies
Last Post
GMCtrk
FORCED INDUCTION
67
07-17-2015 06:39 PM
