Ls6 intake swap on a 6.0l
#14
Is this still the best option for adapting the truck accessories to an LS1 intake. I'm gonna need to do this soon and haven't been able to find much info. Didn't see the bracket on Speartech's website either. If anybody could provide some help ASAP I'd appreciate it.
#16
Get over it, provide tech, or don't bother replying. Being an e-hardass doesn't help anyone, myself included. The thread has already got the basic info so there's no reason not to ask for more details. Anybody else got something helpful to provide?
#17
TECH Enthusiast
iTrader: (9)
Join Date: Apr 2007
Location: New York
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
You can now buy an L92 water pump that will clear the TB.
Speartech still makes the bracket but at close to a hundred bucks you can do it yourself! I went with Motoronic 60lb inj and aftermarket rails so don't know about any problems with the stock set up. I had another problem with the procharger bracket but that was solved with a smaller idler pully.
Speartech still makes the bracket but at close to a hundred bucks you can do it yourself! I went with Motoronic 60lb inj and aftermarket rails so don't know about any problems with the stock set up. I had another problem with the procharger bracket but that was solved with a smaller idler pully.
Thread
Thread Starter
Forum
Replies
Last Post
ARC
GMT 800 & Older GM General Discussion
57
02-21-2022 10:54 AM
oharajo
Tuning, Diagnostics, Electronics, and Wiring
2
07-18-2015 09:24 PM