TXSZ66AVLANCHE

iTrader: (7)

Going to be starting from scratch, from the shorty head flanges back. To allow more room to run the pipe....this is the first step lol

TXSZ66AVLANCHE

iTrader: (7)

Painted and installed....fits great, but not for what im trying to do. Going to build another trans support from square tube. The next one will curve upwards on the right and left side by the mounting bolts in order to allow wide open space directly under the transmission.


So anyone want to buy the round tube trans mount?

dragr1

Did I miss something, what's with the trans mount in this thread?

dragr1

I have a magnaflow on my '00 Burb 2500 using all the stock exhaust piping. Basically, it's in the exact location of the stock muffler and is almost the exact lentgh of the stock muffler. The drone is real noticeable between 1900-2400, so at all highway speeds. Any suggestions?

bullygoat

That's so he can get more room to run the exhaust better.

TXSZ66AVLANCHE

iTrader: (7)

Much more room with the tube mount versus the stamped factory mouiunt.

dragr1

Gotcha, sorry for the confusion.

TXSZ66AVLANCHE

iTrader: (7)

So here is the latest trans mount, and a section of my exhaust.

KleenHall

OH WOW, thats sweet

BigBlueLB756

Since you asked for a possible solution to exhaust drone, I'm listing three forum threads with a ton of information on this subject.

http://www.camaro5.com/forums/showthread.php?t=102075

http://forum.grrrr8.net/showthread.php?t=10801

http://www.g8board.com/forums/showthread.php?t=16077

I know this is a lot of information, but I felt it needed to be on this forum, too, so that more people could have access to it.