milling 317s to match 243's cc
#1
milling 317s to match 243's cc
any one done this or something similar?
I'm wanting to get some heads for a LS1 5.7 bore. (5.3 bored to a 5.7)
I'm trying to get around paying a higher price with the 243s. This is a budget build for a 2000 s-10 project. I want to use a 226 Patriot cam. I'm wanting 64cc chambers, just like the 243s, but without the price.
So far I'm using stock flat top Ls1 pistons, and that's it. It's either the milled 317s, or do some home ported/milled 241s.
I currently have both sets of heads. (317 and 241)
I'm wanting to get some heads for a LS1 5.7 bore. (5.3 bored to a 5.7)
I'm trying to get around paying a higher price with the 243s. This is a budget build for a 2000 s-10 project. I want to use a 226 Patriot cam. I'm wanting 64cc chambers, just like the 243s, but without the price.
So far I'm using stock flat top Ls1 pistons, and that's it. It's either the milled 317s, or do some home ported/milled 241s.
I currently have both sets of heads. (317 and 241)
#5
he's settled on some flat top, Hypernutechnic (not forged) pistons.