Searching4Sierra

iTrader: (27)

i got a IAT sensor off a gm car and i mounted it after my blower, it has two wires coming out of it. which two wires from my MAF do i cut and connect it to

MikeGyver

iTrader: (5)

Solid black, tan. The two wires that are together on the opposite end of the connector from the pink and yellow wires, and not the black w/white in the center of the connector.

Searching4Sierra

iTrader: (27)

thank you

DanaliHD

iTrader: (5)

where ya moving it to? I want to move mine too to be after the whipple.

Searching4Sierra

iTrader: (27)

im going to move it a few inches in front of the TB, i might be able to get some pics loaded up later tonight if you want.

JERRY2500

I have mine located before th TB

DanaliHD

iTrader: (5)

I have a methanol injection kit on my truck. should i spray the methanol before the IAT sensor to get a more accurate reading? I will want to move the iat after the blower but there's not too much room between it and the intake.

Mort

I moved my IAT Sensor so that it would be between the meth injection and the TB to get a reading of the IATs after the air was cooled by the meth/water injection.