GM Engine & Exhaust Performance EFI | GEN I/GEN II/GEN III/GEN IV Engines |Small Block | Big Block |

Muffler decisions

Thread Tools
 
Search this Thread
 
Old 10-03-2009 | 04:08 PM
  #11  
dlt76028's Avatar
12 Second Truck Club
iTrader: (13)
 
Joined: Sep 2007
Posts: 5,883
Likes: 2
From: Crowley, TX
Default

The results in HP order:
1.Flowtech Warlock (open) 374.2 hp/ 333.1 tq
2.Bassani Real Street 373.7 hp/ 333.8 tq
3.Hooker Maxflow 373.5 hp/ 333 tq
4.Borla XS 373.3 hp/ 332.6 tq
5.Magnaflow 372.8 / 332.5 tq
6.MAC 372.3 hp / 331.5 tq
7.Flowtech Afterburner 372.3 hp/ 330.1 tq
8.Hooker Aerochamber 372.1 hp/ 330.4 tq
9.Bassani 372 hp/ 333.5 tq
10.Spintech 371.6 hp/ 332.2 tq
11.Edelbrock Performer RPM 370.9 hp / 331.3 tq
12.Borla XR1 370 hp/ 334 tq
13.Flowtech Terminator 369.5 hp / 331.3 tq
14.Dynomax Ultra Flo 369.4 / 333.2 tq
15.Flowmaster 369.4 hp / 331.8 tq
16.Flowtech Warlock 366.3 hp / 325.3 tq
17.No muffs 365.2 hp / 330.1 tq

Sound Off in Quietest to Loudest (Decibels):

1.Borla XS, 80db at idle, 90db at 2,000 rpm, 110db at WOT.
2.Hooker Maxflow, 80db at idle, 90db at 2,000 rpm, 120db at WOT.
3.Magnaflow, 82db at idle, 91 at 2,000 rpm, 114db at WOT.
4.Flowmaster, 82db at idle, 93 at 2,000 rpm, 115db at WOT.
5.Flowtech Warlock, 83db at idle, 92 at 2,000 rpm, 112db at WOT.
6.Dynomax UltraFlo, 83db at idle, 94 at 2,000 rpm, 113db at WOT.
7.Borla XR1, 83db at idle, 96db at 2,000 rpm, 118db at WOT.
8.Bassani Street, 83db at idle, 96db at 2,000 rpm, 120db at WOT.
9.Edelbrock RPM, 84db at idle, 93db at 2,000 rpm, 118db at WOT.
10.Bassani Real Street, 84db at idle, 96db at 2,000 rpm, MAX. (120+db).
11.Flowtech Afterburner, 86db at idle, 94db at 2,000 rpm, 115db at WOT.
12.Flowtech Terminator, 86db at idle, 94db at 2,000 rpm, 119db at WOT.
13.Hooker Aerochamber, 87db at idle, 94db at 2,000 rpm, 114db at WOT.
14.SpinTech, 87db at idle, 97db at 2,000 rpm, 116db at WOT.
15.MAC, 87db at idle, 98db at 2,000 rpm, 119db at WOT.
16.No Muffler, 91db at idle, 103db at 2,000 rpm, MAX. (120+db).


i got a flowtech afterburner cuz it was like 50 bucks, and it doesnt sound bad either...
Old 10-04-2009 | 01:07 AM
  #12  
Conekiller01's Avatar
Teching In
 
Joined: May 2009
Posts: 6
Likes: 0
From: Ft Worth, Texas
Default

I dont think many people run them but i just switched from a raspy *** 40 series flowmaster to a pypes performance M-80 straight through its built pretty much like a magnaflow and you can get a brannd new stainless one shipped from summit or jegs for about 45 dollars i love mine no highway drone and quiet as a church mouse at idle but is loud and bad *** at WOT trust me you will love the low end feel you get once you take that flowmaster off but to whatever you get post vids!!
Old 10-05-2009 | 03:39 PM
  #13  
low2001gmc's Avatar
TECH Fanatic
iTrader: (137)
 
Joined: Jul 2007
Posts: 1,110
Likes: 5
From: Elsa, South Texas (956) 802-7700
Default

hooker aerochamber 22 inch long, no rasp, smooth upon acceleration, not too loud, love it. got a spare for sale as it is discontinued. will sell cheap. Rob (956) 802-7700. single 3 inch in and single 3 inch out

Last edited by low2001gmc; 10-05-2009 at 03:39 PM. Reason: add info.
Old 10-05-2009 | 03:40 PM
  #14  
low2001gmc's Avatar
TECH Fanatic
iTrader: (137)
 
Joined: Jul 2007
Posts: 1,110
Likes: 5
From: Elsa, South Texas (956) 802-7700
Default

Originally Posted by dlt76028
the results in hp order:
1.flowtech warlock (open) 374.2 hp/ 333.1 tq
2.bassani real street 373.7 hp/ 333.8 tq
3.hooker maxflow 373.5 hp/ 333 tq
4.borla xs 373.3 hp/ 332.6 tq
5.magnaflow 372.8 / 332.5 tq
6.mac 372.3 hp / 331.5 tq
7.flowtech afterburner 372.3 hp/ 330.1 tq
8.hooker aerochamber 372.1 hp/ 330.4 tq
9.bassani 372 hp/ 333.5 tq
10.spintech 371.6 hp/ 332.2 tq
11.edelbrock performer rpm 370.9 hp / 331.3 tq
12.borla xr1 370 hp/ 334 tq
13.flowtech terminator 369.5 hp / 331.3 tq
14.dynomax ultra flo 369.4 / 333.2 tq
15.flowmaster 369.4 hp / 331.8 tq
16.flowtech warlock 366.3 hp / 325.3 tq
17.no muffs 365.2 hp / 330.1 tq

sound off in quietest to loudest (decibels):

1.borla xs, 80db at idle, 90db at 2,000 rpm, 110db at wot.
2.hooker maxflow, 80db at idle, 90db at 2,000 rpm, 120db at wot.
3.magnaflow, 82db at idle, 91 at 2,000 rpm, 114db at wot.
4.flowmaster, 82db at idle, 93 at 2,000 rpm, 115db at wot.
5.flowtech warlock, 83db at idle, 92 at 2,000 rpm, 112db at wot.
6.dynomax ultraflo, 83db at idle, 94 at 2,000 rpm, 113db at wot.
7.borla xr1, 83db at idle, 96db at 2,000 rpm, 118db at wot.
8.bassani street, 83db at idle, 96db at 2,000 rpm, 120db at wot.
9.edelbrock rpm, 84db at idle, 93db at 2,000 rpm, 118db at wot.
10.bassani real street, 84db at idle, 96db at 2,000 rpm, max. (120+db).
11.flowtech afterburner, 86db at idle, 94db at 2,000 rpm, 115db at wot.
12.flowtech terminator, 86db at idle, 94db at 2,000 rpm, 119db at wot.
13.hooker aerochamber, 87db at idle, 94db at 2,000 rpm, 114db at wot.
14.spintech, 87db at idle, 97db at 2,000 rpm, 116db at wot.
15.mac, 87db at idle, 98db at 2,000 rpm, 119db at wot.
16.no muffler, 91db at idle, 103db at 2,000 rpm, max. (120+db).


I got a flowtech afterburner cuz it was like 50 bucks, and it doesnt sound bad either...
on quietest to loudest, you have the hooker maxflow as quieter than the aerochamber>>>typo???
Old 10-06-2009 | 05:50 AM
  #15  
Bowtie03's Avatar
Thread Starter
TECH Enthusiast
iTrader: (4)
 
Joined: Apr 2008
Posts: 598
Likes: 0
From: Memphis,TN
Default

Originally Posted by low2001gmc
hooker aerochamber 22 inch long, no rasp, smooth upon acceleration, not too loud, love it. got a spare for sale as it is discontinued. will sell cheap. Rob (956) 802-7700. single 3 inch in and single 3 inch out
Thanks but I'm looking to get the shorter casing for louder sound.
Old 10-06-2009 | 05:53 AM
  #16  
Bowtie03's Avatar
Thread Starter
TECH Enthusiast
iTrader: (4)
 
Joined: Apr 2008
Posts: 598
Likes: 0
From: Memphis,TN
Default

Okay so I'm going to go with the 3" SI/SO with LT's and HF cats.

Any suggestions on Cats...Random Tech or Magnaflow? Any others?
Old 10-06-2009 | 01:37 PM
  #17  
Mr. Sandog's Avatar
TECH Veteran
 
Joined: Mar 2004
Posts: 4,632
Likes: 2
From: Sun Diego
Default

Stock cats are best if you want to run problem-free.
Old 10-07-2009 | 11:18 AM
  #18  
Bowtie03's Avatar
Thread Starter
TECH Enthusiast
iTrader: (4)
 
Joined: Apr 2008
Posts: 598
Likes: 0
From: Memphis,TN
Default

How about doing a bolt in set of cats. Is it worth it? That way I only use them when I have to go through inspection.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
'02SOMz28
WTB (Wanted To Buy)
1
11-02-2015 06:47 PM
03sierraslt
GM Engine & Exhaust Performance
14
10-09-2015 06:53 AM
Rockrz
GM Engine & Exhaust Performance
4
09-29-2015 10:07 AM
OHsixLS3
Sponsor Feedback
8
09-25-2015 05:38 PM




All times are GMT -5. The time now is 09:54 AM.