New Tune .... New Issues ..... w/video
01-31-2008, 08:21 PM
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Mar 2007
Location: Delaware
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
New Tune .... New Issues ..... w/video
It was a half way decent day here in delaware (compared to the 30's that is has been), so i decided to come home from work and finish a few things i started last week.
Installed new belltech lifting shackles - rear has no clearence from the bumpstops as you can see i nthe pictures ..... after new flip kit and new leaf springs installed ......
Installed new spark plugs(tr5), others(tr6) were fouled really bad after running with now tune ...... and put the new pcu in and blast this thing around the block.... well ran good almost no idle surging and no stalling anymore! but..... I couldnt get it to shift out of first gear at all, thinking the vacuum must have came undone from the trans (has to be it) even my brakes were a bit more squishy after this new tune. when its light out ill figure out this trans issue.
p1336 code is up ....... need crank relearn i suppose.
First drive with new tune ..... probably shouldnt with new codes ... but that wouldnt be any fun......
all videos from digital camera .... all i have .....
Youtube link ......
http://youtube.com/watch?v=vdgIjUmmrE0
Photobucket link Below .......
Installed new belltech lifting shackles - rear has no clearence from the bumpstops as you can see i nthe pictures ..... after new flip kit and new leaf springs installed ......
Installed new spark plugs(tr5), others(tr6) were fouled really bad after running with now tune ...... and put the new pcu in and blast this thing around the block.... well ran good almost no idle surging and no stalling anymore! but..... I couldnt get it to shift out of first gear at all, thinking the vacuum must have came undone from the trans (has to be it) even my brakes were a bit more squishy after this new tune. when its light out ill figure out this trans issue.
p1336 code is up ....... need crank relearn i suppose.
First drive with new tune ..... probably shouldnt with new codes ... but that wouldnt be any fun......
all videos from digital camera .... all i have .....
Youtube link ......
http://youtube.com/watch?v=vdgIjUmmrE0
Photobucket link Below .......
01-31-2008, 08:36 PM
#3
On The Tree
Thread Starter
iTrader: (1)
Join Date: Mar 2007
Location: Delaware
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
had one other not so but is very much so a problem .... sorta ....... everytime i hit the gas it would light em up!! couldnt hold the tires down ..... i have lakewood traction bars to go on but really need to put my rims on to tame the gears down!!!!
all rimmed up ..... 295 40 r22 (rear)
225 30 r20 (front)
found this picture ... and reminded me how far i came ......
all rimmed up ..... 295 40 r22 (rear)
225 30 r20 (front)
found this picture ... and reminded me how far i came ......
Trending Topics
02-01-2008, 07:24 AM
#10
formerly 1BADC10 (12/14/2011)
iTrader: (2)
Join Date: Aug 2005
Location: TX
Posts: 2,135
Likes: 0
Received 0 Likes
on
0 Posts
Nice sound of the engine.... I remember that sound. Got tired of it after a year. Had to quiet it down a couple of weeks ago. 
But it makes it's presence known still when I mash the "go" pedal. 
Git 'r dun! 
But it makes it's presence known still when I mash the "go" pedal. Git 'r dun!