PeewterSS4.8

Has anyone used patriot cams? because a friend of mine wanted to get a 226/226 585/585 112lsa on a 2002 gmc rcsb 5.3 z71. How would that cam work with a yank 3k stall?

Mr. Sandog

AFAIK there is no such thing as a 'Patriot Cam.' Maybe they have Comp or Crane grind cams for them (in which case I would just go straight to the source).

Zick

iTrader: (18)

I believe he is talking about this cam.

http://www.patriot-performance.com/w...07473&DID=1225

PeewterSS4.8

[QUOTE=Zick]I believe he is talking about this cam.
http://www.patriot-performance.com/w...07473&DID=1225[/QUO

yup those are the ones i was talking about. How would the 226 cam work on a 2002 gmc rcsb z71 5.3

J&J PERFORMANCE

The patriot cams are Lunati cams I recently purchased there ls6 head combo and it came with there heads Lunati cam and Harlend Sharp roller rockers

PeewterSS4.8

What Cam did you get, and did you like the heads and cam combo?

PeewterSS4.8

Would anyone happen to know the powerband of the 226 cam??

J&J PERFORMANCE

I did purchase the head and cam kit I got it from summit. The cam was a lunnati 226/226 578/578 112lsa. And let me tell ya it lopes alot most people double check the truck. They say its a 585 when you order it but thats what i recived im still running truck intake and i rev 6200 pulling hard.If you have any Q about the kit e mail me at xtremelyblazd@aol.com and ill help you with what i can and let you know my exact setup

Rhino79

iTrader: (7)

On a 5.3, it hits hard in between 3500 and 4000 and pulls like a raped ape till the truck intake runs out of breathe at about 6400.

99Silver6.0

iTrader: (1)

Just dont use the valve springs.............