performance help
#1
performance help
So I'm not going to lie, I know some stuff about vehicles but am a long way off of being a know-it all. Anyways I have a maga-charger going on my truck and was wondering what else I could do to it while its in the shop to get a little more performnace out of it. I was thinking either a cam or headers or something. I already have an intake and exhaust. Just want to go faster without breaking the bank just yet.
#4
sorry I guess I should have posted that, it's a 2002 chevy silverado reg. cab short box, with the 5.3L. I'm in the midst of a horsepower war with a buddy and wish to remain on top!
#5
Mr. Obvious
iTrader: (4)
if you dont mind telling, what does he have and we can tell you how to demolish him
the lingenfleter GT2-3 cam is great for the radix, also needs ls6 valvesprings or better and some hardened pushrods
a header and y-pipe setup would really help the supercharger, id suggest either the pacesetter longtube and off-road y setup( for non-emissions areas) or the dynatech longtube and catted ypipe (for emmissions controlled areas)
a dyno tune will really help it out too
after the supercharger is installed and tuned get a smaller pulley for some real fun
the lingenfleter GT2-3 cam is great for the radix, also needs ls6 valvesprings or better and some hardened pushrods
a header and y-pipe setup would really help the supercharger, id suggest either the pacesetter longtube and off-road y setup( for non-emissions areas) or the dynatech longtube and catted ypipe (for emmissions controlled areas)
a dyno tune will really help it out too
after the supercharger is installed and tuned get a smaller pulley for some real fun
#6
he's got a nissan titan with cold air-intake, exhaust , and what ever else. Basically, I would like to quicker than everyone else. My truck probably is already quicker than his, I just want to be super-sure when I line up next to him. What exactly would a smaller pulley do? And wheres a good place to get a set of headers?
Trending Topics
#9
Mr. Obvious
iTrader: (4)
are you 4wd?
if you have the 5.3+ radix, cam, headers, exhaust, intake, tune, smaller pulley(3.0 or smaller) you should have about 450rwhp
some efans and underdrive pulleys will help to free up HP too
id suggest some lower gears and a lsd too, and get a stall when you get your trans
you are going to need a built trans for this(radix)
if you have the 5.3+ radix, cam, headers, exhaust, intake, tune, smaller pulley(3.0 or smaller) you should have about 450rwhp
some efans and underdrive pulleys will help to free up HP too
id suggest some lower gears and a lsd too, and get a stall when you get your trans
you are going to need a built trans for this(radix)
#10
I forgot to mention that It will be getting tuned. No 4wd- it was ordered from factory as a 2wd with traction control. It has some different options such as the traction control, ride control with electric shocks, power seats, etc.