Porsche 944 swap with 5.3l Help
#21
Staging Lane
Thread Starter
Join Date: Jan 2009
Location: Oklahoma City
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Thanks
Thanks Skeet for the Harness. It is being sent off to another member for a 100% trouble free swap-in mod to the existing 944 harness.
I still am in need of a good PCM if anyone has an extra. Thanks for everyone's help...
These car's can handle alot of horsepower, They are being raced in SCCA events with the LS engines installed. I am Getting ready to send some conversion parts to a guy that just removed his LT1 and is putting in an LS3 as we speak!
I still am in need of a good PCM if anyone has an extra. Thanks for everyone's help...
These car's can handle alot of horsepower, They are being raced in SCCA events with the LS engines installed. I am Getting ready to send some conversion parts to a guy that just removed his LT1 and is putting in an LS3 as we speak!
#23
Staging Lane
Thread Starter
Join Date: Jan 2009
Location: Oklahoma City
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
I cheated on the swap....Hehe
Saved me about 450-500 bucks without having to buy all the Corvette accessories.....Everything from the 4.8/5.3/6.0 motors can be reused when swapping on the LS1 intake, I didn't even have to change out the harmonic balance pulley.
For my application I designed a bracket to offset the truck alternator to clear the Porsche hood. This wouldn't even be needed for the Chevy trucks with the LS1 intake swap. I will make more as I anticipate alot of orders from the Jeep guys and Camaro/Firebird folks putting in the 4.8/5.3/6.0 motors with the LS intakes.
http://944hybrids.forumotion.com/lsx...-t256.htm#2255
For my application I designed a bracket to offset the truck alternator to clear the Porsche hood. This wouldn't even be needed for the Chevy trucks with the LS1 intake swap. I will make more as I anticipate alot of orders from the Jeep guys and Camaro/Firebird folks putting in the 4.8/5.3/6.0 motors with the LS intakes.
http://944hybrids.forumotion.com/lsx...-t256.htm#2255
Last edited by xschop; 09-17-2009 at 09:33 PM.
#28
TECH Enthusiast
iTrader: (3)
Saved me about 450-500 bucks without having to buy all the Corvette accessories.....Everything from the 4.8/5.3/6.0 motors can be reused when swapping on the LS1 intake, I didn't even have to change out the harmonic balance pulley.
For my application I designed a bracket to offset the truck alternator to clear the Porsche hood. This wouldn't even be needed for the Chevy trucks with the LS1 intake swap. I will make more as I anticipate alot of orders from the Jeep guys and Camaro/Firebird folks putting in the 4.8/5.3/6.0 motors with the LS intakes.
http://944hybrids.forumotion.com/lsx...-t256.htm#2255
For my application I designed a bracket to offset the truck alternator to clear the Porsche hood. This wouldn't even be needed for the Chevy trucks with the LS1 intake swap. I will make more as I anticipate alot of orders from the Jeep guys and Camaro/Firebird folks putting in the 4.8/5.3/6.0 motors with the LS intakes.
http://944hybrids.forumotion.com/lsx...-t256.htm#2255
That's the nice thing about the genIII engines, everythings interchangeable.
#29
Staging Lane
Thread Starter
Join Date: Jan 2009
Location: Oklahoma City
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Pm
Sent you a PM Phase.
As for PCM, I still haven't ran across one from a cable throttle 5.3L truck that had a Manual transmission. This would be plug n play. I have the harness from Skeet and the 944 harness being converted and used as the template for a full-blown stand-alone harness for the 944 with these motors....
As for PCM, I still haven't ran across one from a cable throttle 5.3L truck that had a Manual transmission. This would be plug n play. I have the harness from Skeet and the 944 harness being converted and used as the template for a full-blown stand-alone harness for the 944 with these motors....
#30
PT's Slowest Truck
iTrader: (19)
Sent you a PM Phase.
As for PCM, I still haven't ran across one from a cable throttle 5.3L truck that had a Manual transmission. This would be plug n play. I have the harness from Skeet and the 944 harness being converted and used as the template for a full-blown stand-alone harness for the 944 with these motors....
As for PCM, I still haven't ran across one from a cable throttle 5.3L truck that had a Manual transmission. This would be plug n play. I have the harness from Skeet and the 944 harness being converted and used as the template for a full-blown stand-alone harness for the 944 with these motors....