ok so I have a bone stock L33 I picked up with 24k on it.

I'm picking up a used LSXrt intake manifold and I'm wanting to go ahead and do some type of cam.

Now i'm kind of wanting that is still streetable and not strip only.

A buddy offered me his setup he was going to put in his.


What do you guys think?

Cam -

Intake valve lift - .580, degrees of duration 225
Exhaust valve lift - .590, degrees of duration 229
Lobe center 114 + 4 LSA

Push rods -

5/16" x 7.400" hardened

Valve Springs-

Gold Dual Valve Springs, Super 7 Locks, Ti retainers, Seals & .505" Bases (use with stock guides)

 

i have that cam in my 4.8 daily driver its very streetable. i would make sure that you do some supporting mods though.

 

That cam should work well for you. You'll want a converter & gears to get the most out of it.