GM Engine & Exhaust Performance EFI | GEN I/GEN II/GEN III/GEN IV Engines |Small Block | Big Block |

quick ques

Thread Tools
 
Search this Thread
 
Old 10-11-2004 | 05:53 PM
  #1  
loweredon20s's Avatar
Thread Starter
Teching In
 
Joined: Feb 2004
Posts: 47
Likes: 0
Default quick ques

my dads friend order a part today form the junk yard and i havnt looked inside the truck... but its a 99 silverado 4x4 now i thought in 99 the motor options were 4.3 4.8 and 5.3 ... the part he oder they told him his truck has the 5.7... i hought they stop using the 5.7 in 98 (and u kno for a fact the motor wasnt swapped wit a ls1 or ls6)..is it possible maybe the early 99's could of have the 5.7....thanks
Old 10-11-2004 | 05:57 PM
  #2  
one03sierra's Avatar
Formerly one92rs
iTrader: (1)
 
Joined: Apr 2003
Posts: 4,205
Likes: 1
From: league city texas
Talking

yes sir it is. where is the air filter located. if it is in the front on the passenger side then it is a 5.3 4.8. if it is in the middle of the fender on the passenger side then it is a 5.7.
Old 10-11-2004 | 05:58 PM
  #3  
snoman's Avatar
Launching!
 
Joined: Oct 2004
Posts: 251
Likes: 0
From: Ohio
Default

The 5.7 was made until atleast 2000 but they were never put in NBS trucks, the confusion comes from 99 model being built both ways OBS and NBS (Classic or old body style and Silverado style trucks) and in 2000 the K3500s were OBS and came with a 5.7 standard (I have one too) Some part places really get confused over this.
Old 10-11-2004 | 06:55 PM
  #4  
budhayes3's Avatar
PT's Slowest Truck
iTrader: (19)
 
Joined: Apr 2004
Posts: 17,863
Likes: 2
From: Hackensack, NJ
Default

That's right, in 99 they still offered the "classic" style truck with a 5.7, and the NBS Silverado with the 4.3, 4.8, and 5.3. When I went to buy my truck, there was only a couple of "classics" on the lot, and they were very ugly colors...hence I drive a 5.3.
Old 10-11-2004 | 10:10 PM
  #5  
loweredon20s's Avatar
Thread Starter
Teching In
 
Joined: Feb 2004
Posts: 47
Likes: 0
Default

yeah i see whateveryone is sayin but his is the 99002 stlye not the 98 lookin one...so tht means it has to be the 5.3
Old 10-11-2004 | 10:14 PM
  #6  
snoman's Avatar
Launching!
 
Joined: Oct 2004
Posts: 251
Likes: 0
From: Ohio
Default

A dead giveaway beside the coils and engine appearance is the fact that the 4.8 and 5.3's do not have a distibutor while the 5.7 does.
Old 10-12-2004 | 12:03 AM
  #7  
James B.'s Avatar
TECH Fanatic
iTrader: (1)
 
Joined: Mar 2003
Posts: 1,984
Likes: 2
From: 33.91° -117.48°
Default

The 5.7 was made until at least 2000 but they were never put in NBS trucks...
Incorrect again. The Vortec L31 was put into "New Body Style" trucks sold in Mexico.
Old 10-12-2004 | 06:07 AM
  #8  
snoman's Avatar
Launching!
 
Joined: Oct 2004
Posts: 251
Likes: 0
From: Ohio
Default

But we do not live in Mexico and there are a lot of vehicals on the market there and in south america that never see the light of day here so they really do not matter.
Old 10-12-2004 | 06:14 AM
  #9  
one03sierra's Avatar
Formerly one92rs
iTrader: (1)
 
Joined: Apr 2003
Posts: 4,205
Likes: 1
From: league city texas
Talking

you are wrong. there are a lot of mexico trucks out there.



although it is a mess does his engine look anything like this. if it does not then it will have the inlet to the intake in the middle and a distributer.
Old 10-12-2004 | 06:43 AM
  #10  
snoman's Avatar
Launching!
 
Joined: Oct 2004
Posts: 251
Likes: 0
From: Ohio
Default

If this is a truck 350, why does it have aluminum heads?


Quick Reply: quick ques



All times are GMT -5. The time now is 01:29 AM.