Radix owners inside
#31
Originally Posted by whitt1
I don't mind,but I don't have pretty dyno charts we ran threw the gears with the tires smoking on the dyno and the dyno hooked up about 4000rpm in 3rd.The 4.56 gears made it nearly impossible to get torque figures it was going threw the gears so fast that people in the front of the speed shop thought there was a Pro Stocker on the dyno.
here is what whitt's radix'd 402 put down:
"I'm running a 402 with a 228/234 .588/.598 cam and I'm only seeing 6lbs. of boost,I saw 618rwhp at 5900rpm,but was making 427rwhp by 4100rpm.I went with a bigger inline pump to remedy my fuel pressure loss.I had problems dynoing low rpms spinning my tires all the way through 2nd gear"
EDIT: I added the larger font because they said it couldn't be done
#34
TECH Veteran
Originally Posted by Flyer
You're just gonna leave it hanging there ... ???
I don't really think just the RADIX is good for 12's.
I don't really think just the RADIX is good for 12's.
lol, smaller pulley testing will come.
#35
TECH Senior Member
iTrader: (1)
Join Date: Jan 2003
Location: Armpit of East TX
Posts: 9,342
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BlownChevy
Remember when they said it could not run 11's either
There are a few guys that are in the low 13's with a Radix and the SS, nothing more than spending some time with the calibration.
There are a few guys that are in the low 13's with a Radix and the SS, nothing more than spending some time with the calibration.