screen delete on MAF
#1
TECH Enthusiast
Thread Starter
Join Date: Jun 2005
Location: Napoleonville,La.
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
screen delete on MAF
I'm getting a CAI soon and i wanted to go ahead and descreen the MAF while I had it off. Do I just knock it out or what? Do I have to get a tune so the check engine light doesn't come on? Also what is a TB bypass? Thanks!
#5
Tribe Shaman
iTrader: (4)
Join Date: May 2004
Location: Texas
Posts: 3,050
Likes: 0
Received 0 Likes
on
0 Posts
if you take a closer look you will see a ring that snaps in to hold the screen in place.
remove the ring and the screen just falls out.
if your truck starts to run odd or a little different just pop the screen back in and snap the ring back in to place.
remove the ring and the screen just falls out.
if your truck starts to run odd or a little different just pop the screen back in and snap the ring back in to place.
#6
TECH Senior Member
iTrader: (28)
I pulled mine out and had it tuned for it, there's no big SOTP difference but it's a free and allows more air to enter at a greater velocity. The TB bypass is just re-routing a coolant line away from the throttle body to keep a cooler intake charge. If you live in a cold climate and it's a daily driver I don't recommend it. But warm climate drivers have no loss-> no need to have warm starting temps.
#7
TECH Junkie
iTrader: (2)
Join Date: Mar 2005
Location: Spring, TX
Posts: 3,197
Likes: 0
Received 0 Likes
on
0 Posts
You can remove it. Will not cause a light to show up. Tune for it??? LOL.
It made no difference on mine. Took it out and it ran the same with or without it.
It's a "no" gainer free mod on most N/A engines.
Jim
It made no difference on mine. Took it out and it ran the same with or without it.
It's a "no" gainer free mod on most N/A engines.
Jim
Trending Topics
#9
Need More N2O Mod
Join Date: Oct 2003
Location: Not in Koonerville MD anymore
Posts: 4,381
Likes: 0
Received 0 Likes
on
0 Posts
I descreened mine and ran it for over a year. i wasn't pulling alot of air threw it. I put the 408 in and it was giving false readings. Had a new one with screen put in and back to normal.
#10
TECH Enthusiast
iTrader: (3)
Join Date: Nov 2005
Location: West Des Moines, Iowa
Posts: 655
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CHEVY6000VHO
You can remove it. Will not cause a light to show up. Tune for it??? LOL.
It made no difference on mine. Took it out and it ran the same with or without it.
It's a "no" gainer free mod on most N/A engines.
Jim
It made no difference on mine. Took it out and it ran the same with or without it.
It's a "no" gainer free mod on most N/A engines.
Jim