Shift Kit and Pulley Recommendations
#1
TECH Apprentice
Thread Starter
Join Date: Apr 2003
Location: Conway, SC
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Shift Kit and Pulley Recommendations
I have a b-day coming up and will have a little money to play with.
Let me know what you recommend and why!
Josh Hucks
Let me know what you recommend and why!
Josh Hucks
#6
Launching!
Join Date: Apr 2003
Location: Vancouver, Washinton
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Re: Shift Kit and Pulley Recommendations
I was looking at the TCI shift kit #376002. It includes the servos and tranny filter for about 30 bucks cheaper then the transgo. Check out this thread in the auto tranny section.
#7
TECH Apprentice
Thread Starter
Join Date: Apr 2003
Location: Conway, SC
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Re: Shift Kit and Pulley Recommendations
On the pulleys, I remember a while ago there was a problem with the belt if the alternator pulley was used to. What became of this?
Do you think I should use the alt. pulley too or just the crank?
Josh Hucks
Do you think I should use the alt. pulley too or just the crank?
Josh Hucks
Trending Topics
#9
13 Second Truck Club
iTrader: (1)
Join Date: Mar 2003
Location: Pueblo de Nuestra Señora la Reina de los Ángeles de la Porciúncula
Posts: 4,094
Likes: 0
Received 1 Like
on
1 Post
Re: Shift Kit and Pulley Recommendations
I was looking at the TCI shift kit #376002. It includes the servos and tranny filter for about 30 bucks cheaper then the transgo. Check out this thread in the auto tranny section.
I don't know about the F-bods, but I went to the track (with MarineBlue03GMC so he is witness) and put it in 3rd gear to see how much better (if any) it would launch/pull/go faster.
Well, I left it in 3rd the whole way, and I was like, "Crap, end of 3rd gear...will it shift or will it hit the limiter and I have to let off before the 1/4 mile is over?"
To my surprise, it shifted into 4th, but VERY shitty and it felt like it just fell on its face.
Needless to say, I didn't do that again
So, my question is the same as that on the other thread, will this shift kit hold the gear and just hit the limiter instead of what happened when it's stock?
I always wondered what it meant when it says "Will hold any gear"
#10
Re: Shift Kit and Pulley Recommendations
What exactly will "billet intermediate" and "overdrive servos" do?
The TCI servo looks like the factory Corvette servo to me...their shift kit looks like a B&M one that only replaces the seperator plate