so hows my cam swap part list looking for my 6.0
#13
TECH Apprentice
iTrader: (2)
+1 on dowel rods and its quicker to use the TDC method for changing springs. I highly recommend the LS valve spring tool by procomp.
The head gasket kit was probably recommended because you were planning on changing lifters which would require head removal.
There are cheaper pushrods to be had; I wanna say I picked mine up at SDPC for $90 shipped.
The head gasket kit was probably recommended because you were planning on changing lifters which would require head removal.
There are cheaper pushrods to be had; I wanna say I picked mine up at SDPC for $90 shipped.
#14
On The Tree
Join Date: Jun 2010
Location: Okinawa, Japan
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
How about cam gear? Is new cam single or 3 bolt? This almost put a hamper on my weekend cam swap... I about had a heart attack then raced to dealership.
and x3 on the dowels, a good fail safe and piece of mind. Cut 'em to length and lube em up.
and x3 on the dowels, a good fail safe and piece of mind. Cut 'em to length and lube em up.
#15
On The Tree
Thread Starter
+1 on dowel rods and its quicker to use the TDC method for changing springs. I highly recommend the LS valve spring tool by procomp.
The head gasket kit was probably recommended because you were planning on changing lifters which would require head removal.
There are cheaper pushrods to be had; I wanna say I picked mine up at SDPC for $90 shipped.
The head gasket kit was probably recommended because you were planning on changing lifters which would require head removal.
There are cheaper pushrods to be had; I wanna say I picked mine up at SDPC for $90 shipped.
this im not sure about... i need to find out... i THINK that comp cam cuts all there cams in one or the other... but i have researched to see what i have stock yet... and for sure which comp cams comes with... but my plans are to pull it apart starting a friday and back together for work my monday... so i gotta get EVERYTHING... lol... Its my only ride... lol...
#16
TECH Fanatic
iTrader: (8)
this im not sure about... i need to find out... i THINK that comp cam cuts all there cams in one or the other... but i have researched to see what i have stock yet... and for sure which comp cams comes with... but my plans are to pull it apart starting a friday and back together for work my monday... so i gotta get EVERYTHING... lol... Its my only ride... lol...
#18
On The Tree
Thread Starter
http://cgi.ebay.com/ebaymotors/LS1-6...item43a61e1b49
Found these pac springs... $165 shipped ain't bad... Just started shopping them though... Down time at work... Only got my phone so hard to do a lot of web site digging...
Found these pac springs... $165 shipped ain't bad... Just started shopping them though... Down time at work... Only got my phone so hard to do a lot of web site digging...
#19
On The Tree
Thread Starter
#20
On The Tree
Join Date: Jun 2010
Location: Okinawa, Japan
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts