Stainless Works Headers Part 2 with pics :)
#25
This has been posted before, but in case some of you missed my review of the Stainlessworks Headers
http://gmhightechperformance.com/tech/0505htp_truck/
I chose to work with Stainlessworks due to my experience with its products before I started writing for GMHTP. When I make a recommendation in GMHTP, I feel my reputation is on the line because fellow enthusiasts may spend their hard earned cash based on an article I wrote. I stand by my recommendation.
Here is another example of my experience with Stainlessworks. My friend, John Parsons, hand built a pair of 1 5/8" equal length headers for his Chevy II LS1 project, after the engine grew to a 427LS2, he contacted Stainlessworks for help as he didn't have time to build another set from scratch, Stainlessworks bent up an exact duplicate set in 1.75" as seen below.
www.iimuchfabrication.com
http://gmhightechperformance.com/tech/0505htp_truck/
I chose to work with Stainlessworks due to my experience with its products before I started writing for GMHTP. When I make a recommendation in GMHTP, I feel my reputation is on the line because fellow enthusiasts may spend their hard earned cash based on an article I wrote. I stand by my recommendation.
Here is another example of my experience with Stainlessworks. My friend, John Parsons, hand built a pair of 1 5/8" equal length headers for his Chevy II LS1 project, after the engine grew to a 427LS2, he contacted Stainlessworks for help as he didn't have time to build another set from scratch, Stainlessworks bent up an exact duplicate set in 1.75" as seen below.
www.iimuchfabrication.com
#26
PT's Slowest Truck
iTrader: (19)
That's pretty cool John, good to know there's alot of people standing behind their product. I plan on investing in some long tubes and a y-pipe (just like in the article, not sure what size collectors to go with yet though) in the next few months. I'm curious to see what QTP comes up with also, I know that they're developing truck headers too, and they're just a town or so over from where I live.
I really like the looks of grippy's headers, I look forward to hearing about the install and track results
I really like the looks of grippy's headers, I look forward to hearing about the install and track results
#30
PT's Slowest Truck
iTrader: (19)
Originally Posted by YeLLow Fever
how can we good our hands on a nice set of HEADERS
major props ...
joe
major props ...
joe