tiffo60

iTrader: (2)

sorry couldn't resist

custm2500

iTrader: (10)

Those aren't perpotional!!! haha

The are actualy 2 1/4x6

custm2500

iTrader: (10)

Here is about the placement I am looking at.
Image Detail for - re did it <b>through </b>the <b>roll pan </b>and went with a magnaflow sounded much ...

Phantom

iTrader: (16)

that's what she said

TXSZ66AVLANCHE

iTrader: (7)

How about one of the vatozone turbo tailpipe noise makers?

1FastBrick

iTrader: (17)

Use the oval one and go for the center between the lic plate and the body seam.

Use some 2 inch wide low stick masking tape and draw it on first. If you don't like it put more tape and try again.

silver-mod-o

iTrader: (15)

have you rolled into the throttle under load and experienced the craptastic mufflerless joy??

your wife and kids ride in that thing?

custm2500

iTrader: (10)

I havn't loaded it at all nothing but me a 3 young kids. The good news is if it turns out to be a anoying I am only a $60-$100 muffler and 30 min or less away from quieter.

I think there is a good chance that I will add a muffler to one side of the Y behind the axle, get an electric cut out and have mostly quiet and "mufflerless joy". Don't know for sure but again all that is easy to change up rather quickly down the road.

Something like this would be pretty cool.http://www.ebay.com/itm/Ferrari-355-...828303&vxp=mtr
Under hard throttle it opens and is straight pipe, then when I am out of it and only light thottle I have the muffler side of the Y. Gotta find one or uner $750!!!

smithbeatrix

It's not fair. Don't you have any fence pipe line around it? I have paid 120 for real true dual exhaust install.