TBI 350 Mods?
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Jul 2008
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
TBI 350 Mods?
well i just got me a new daily, its a 92 chevy 350. I was wondering what all is there out there that i can do to this motor to make it have some power? I was reading up somewhere and some guy dynoed his and it made like 127 rwhp stock. As of right now all i know mine has is a cam, chip, and K&N filter with some 3.73's. Its pretty peppy for this year truck i would guess... but its burning a little oil and ive got a spare motor id like to build on the side so when this motors wore out i can drop the new one in. Didnt know if there was something like a H/C/I and stuff i can do to make it really run.
Any suggestions? Im kinda wanting around 400 horse to the wheels? if possible?
thanks
justin
Any suggestions? Im kinda wanting around 400 horse to the wheels? if possible?
thanks
justin
#4
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Jul 2008
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
yeah i know thats right... I was actually looking at the edelbrock heads... pretty puch there performer package they have. With some good compression and that package, and maybe a little better TB than stock and a good tune should be some decent numbers?
#5
TECH Senior Member
iTrader: (6)
Join Date: Jul 2005
Location: Decatur, AL
Posts: 5,257
Likes: 0
Received 0 Likes
on
0 Posts
The factory throttle body flows something like 400cfm. It is a choker. You can get a 454 throttle body that flows ~600cfm or get a ported one. You can use a 4 barrel intake and an adapter plate. Those old slow computers are tempermental about doing too many mods such as a large cam. You have to stay concervative. Check with this guy. He has a lot of good info as far as combos to run on his site.www.tbichips.com
#6
I probably have everything you need for about 300-340 hp. The kid ran my truck with no oil pressure, now its knocking. I am going back stock. The engine is still in the truck. If you are interested in the items, pm me.
Thread
Thread Starter
Forum
Replies
Last Post
gmcyukon
GM Parts Classifieds
6
10-03-2015 11:03 PM