Thinking of L92 heads for my lq4. Thoughts??
#42
TECH Enthusiast
iTrader: (4)
Cathedral for the street, rectangle for track/wot performance. Stock casting vs. stock casting. If you have to swap, then the cost has to be considered in what you're spending on performance. If you do that, then IMO a ported 243 should be looked at before going l92s. A nice set of used 243s with good springs goes for $1k or less. Brand new set, if you have cores is $1200.
What does it cost to go to l92s?
I will say, I own both styles. I'm not converting either. If I ever get my afrs on my truck, I'd really like to line up a race vs a rectangle port 6.0 truck.
What does it cost to go to l92s?
I will say, I own both styles. I'm not converting either. If I ever get my afrs on my truck, I'd really like to line up a race vs a rectangle port 6.0 truck.
#45
TECH Senior Member
iTrader: (45)
Join Date: Jun 2005
Location: Hennessey, Oklahoma
Posts: 9,439
Likes: 0
Received 11 Likes
on
5 Posts
I posted in this thread because Ive had ported ls1 heads, milled 243 heads, and milled l92 heads, snd these l92s have the most power and great power all over the power band.. My truck has done proven itself, it still pulles a 24' deck boat damn good up hills down hills passing people in overdrive. Even out pulled a duramax that was rollin coal that was pulling a smaller boat. That's with a donkey dick cam and Vic jr intake which everyone that sits inside their littlle box say it cannot make any torque.
#46
Formerly ScreamingL
all theories aside, dirttrack has the best 2wd 60' that I've seen, and has the fastest n20 ecsb that I know of. he's doing it instead of talking about how to do it. skeet had a beast of a n/a 6.0. both trucks with L92 heads. time for one of us cathedral fans to build something to out perform instead of talking about it. i don't have a full size anymore so i'm out
http://www.yellowbullet.com/forum/sh...d.php?t=585684
#47
TECH Senior Member
iTrader: (5)
some food for thought on subject, take some time and read this thru all the pages
http://www.yellowbullet.com/forum/sh...d.php?t=585684
http://www.yellowbullet.com/forum/sh...d.php?t=585684
#48
TECH Senior Member
iTrader: (45)
Join Date: Jun 2005
Location: Hennessey, Oklahoma
Posts: 9,439
Likes: 0
Received 11 Likes
on
5 Posts
Truck weighed over 300lbs more than when it ran 10.64.. Cam was designed for a **** load more nitrous what we were running then.. Since then I've gone from 2x .060 jets to 2x .073 jets.. I have a bone stock transmission and stock driveshaft with stock ujoints.. I'm jot going to spray anymore to it..