LQ4JOSE

here is what i have going on, im putting together a single cab short bed 89 1500
power plant is a lq4 and a th350 behind it.i am indecisive about how big of a torque converter i am going to need. the specs are as follows(feel free to comment on the specs as well)
ms3 cam
4.10 gears
28 or 30 inch tire"?"

the main purpose for the truck is track duty but will occasionally be driven 2 miles to and from work...

LQ4JOSE

any body?

skeet

iTrader: (18)

is everything else stock?

what i would do is get everything the way you want it, then have the truck dynoed, look at where the torque comes in and where it peaks in the rpm range, take half of that then decide on the torque converter

1slowz71

iTrader: (6)

the man is rite on the gold,
but it will probably be some were around 3.2k ao 3.6k ! but good luck!

Beatdown Z

iTrader: (18)

If the main purpose is track duty, then start looking at 3500 and higher converters...

budhayes3

iTrader: (19)

What are the specs on the ms3 cam?

06Sierra2

237/242, .603"/.609" 2300-6800rpm. says peak around 6400. imo id look around a 3600 stall

Atomic

iTrader: (42)

237/242 .603/.609" on 112-114

If you plan on locking it I would go with a 3600, if you dont, then you may run out of gear by the end of the track depending on what you are doing with the lq4.

ridnlow

iTrader: (5)

Let me know if you need any help wrenching, im right across the bay..

Rhino79

iTrader: (7)

30" tire and a 3800 to 4000 range converter.