tranny ??? 4l80e
#1
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Jun 2002
Location: Houston,Tx
Posts: 1,843
Likes: 0
Received 0 Likes
on
0 Posts
tranny ??? 4l80e
so are all the conections as far as wireing the same? i am thinking when i get a tranny i will try to make a 4l80e work. because i do not want to keep rebuilding 4l60e's
#3
single digit dreamer
iTrader: (6)
Re: tranny ??? 4l80e
No they are not. It takes a few wiring mods and PCM reprogramming to do it. Then it works fine.
#6
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Jun 2002
Location: Houston,Tx
Posts: 1,843
Likes: 0
Received 0 Likes
on
0 Posts
Re: tranny ??? 4l80e
i will but not soon enough for you. my plan is well i need money first. but i want to go buy a 4l80e from a wrecked truck or something not spend much. then have it built and eventualy take a weekend to figure out how to make it work. then i will have a 4l60e just chilling in the garage.
Trending Topics
#8
9 Second Club/LS1TECH Sponsor
iTrader: (14)
Join Date: Nov 2001
Location: Anderson, Indiana
Posts: 1,661
Likes: 0
Received 0 Likes
on
0 Posts
Re: tranny ??? 4l80e
Here's the 4L60E to 4L80E adapter kit we make for $150. It includes the main trans harness adapter as well as the ISS harness which must be added (and the 2 pins plugged into your PCM).
If you have LS1 Edit already you use a 4L80E file with a matching segment #1 ID. If you don't have LS1 Edit we can reprogram your PCM with the 4L80E file. It's actually better if you have Edit, so I don't have to get involved in a bunch of mail order tuning!
When doing in-shop harnesses we just build the harness for which ever trans is being used by the customer, but this adapter will do the same thing.
If you have LS1 Edit already you use a 4L80E file with a matching segment #1 ID. If you don't have LS1 Edit we can reprogram your PCM with the 4L80E file. It's actually better if you have Edit, so I don't have to get involved in a bunch of mail order tuning!
When doing in-shop harnesses we just build the harness for which ever trans is being used by the customer, but this adapter will do the same thing.
#9
TECH Fanatic
Join Date: Mar 2002
Location: toronto
Posts: 1,452
Likes: 0
Received 0 Likes
on
0 Posts
Re: tranny ??? 4l80e
So who is going to be the First to do this swap
i gonna see how long my Built tranny lasts with the current setup
If she Gives in I' definatly going the 80 route
i gonna see how long my Built tranny lasts with the current setup
If she Gives in I' definatly going the 80 route
#10
single digit dreamer
iTrader: (6)
Re: tranny ??? 4l80e
woooooooohooooo!!!! thats the best news i have heard all day!!! I WILL BE CALLING YOU GUYS!!! where have you been hiding, seems like this question has been asked a few times and that is one of the bigest concerns.
i am soo excited about this, now all i have to do is get the damn thing to bolt in.
i am soo excited about this, now all i have to do is get the damn thing to bolt in.