TVS 1900 coolant port AN?
#1
TECH Junkie
Thread Starter
Join Date: Jun 2014
Location: At the dump with a clutch
Posts: 3,135
Received 784 Likes
on
573 Posts
TVS 1900 coolant port AN?
I plan to redo all my coolant lines for my TVS1900 In -12 nylon braided AN lines and fittings just to clean stuff up. One thing I cannot seem to find is a different port for the back of the Maggie. I know I could buy weld on fittings but I'd much rather unbolt this port and bolt on an AN port.
Anyone already have a solution to this problem?
Anyone already have a solution to this problem?
Trending Topics
#8
TECH Junkie
Thread Starter
Join Date: Jun 2014
Location: At the dump with a clutch
Posts: 3,135
Received 784 Likes
on
573 Posts
I bought all braided nylon -12 hose and that stuff frays so bad when cut. I would be eternally mad at myself for using hose clamps and making it worse. Arthur has graciously offered to weld some bungs on for a good price so this piece will be in the way to his house soon.
#10
TECH Junkie
Thread Starter
Join Date: Jun 2014
Location: At the dump with a clutch
Posts: 3,135
Received 784 Likes
on
573 Posts
How did you port them? Just Dremel and rotary file bits? I've never ported anything before but I plan to port match my header flange a little better and I have plenty of rotary files.