00cls1camaross

iTrader: (9)

I'm working on a 4.8 swap on my Gen III LS. My truck originally had the V6. I have adapted the two fuel lines per the V6 to V8 swap guide but I have a 3rd hard line coming up and I don't know what to do with it. Can anyone offer advice?

_zebra

iTrader: (5)

sounds like the evap line, and i'm pretty sure i didn't mess with it at all - just had to get the V8 version.
let me go back & look

_zebra

iTrader: (5)

yep, here was stock:

and after modding:

00cls1camaross

iTrader: (9)

Thank you so much!

What do you mean get the V8 version? I believe that to be the EVAP line and I was just going to connect that line to the EVAP valve on the front of the manifold. Is there a specific pre bent line that is on V8 trucks?

_zebra

iTrader: (5)

i ain't cross-referenced the part numbers in the last 12yrs or so, but i do remember buying one when i did my swap.
i mean, if yours fits without bending much - use it. just remember it is thin plastic & gets brittle when cold.