ThunderZ28

iTrader: (7)

trying to figure the wire schematic for the vette O2 sensor, and the truck O2 Sensor..

I bought 2 vette sensors,(upstream stockers are not switching fast enough) and to keep my lifetime warranty, I am going to splice the female pigtale into my wire loom so that I can just simply plug the O2 sensor in...

any body know the wire configuration for splicing this in???
is it color for color, or is it Diffrent....
I havnt really looked at it yet.. and thought I would ask here first..

Zick

iTrader: (18)

Huh, I thought they were plug and play.

So they don't come with any ends or the ends don't plug right into ours?

dewmanshu

iTrader: (4)

Not only did I think they were plug and play but you can speed up the switching in HPT. The vettes, just have hotter heaters. Which will obviously help you but probably won't last.

ThunderZ28

iTrader: (7)

Dont have HP, I have Edit...
the Vette O2s I bought have a Lifetime warranty so i am not worried about them going bad later..
Just need to make sure I splice these Female pigtales in right.

Zick

iTrader: (18)

So they did not come with prewired ends?

Okie5.3

iTrader: (1)

try this.


http://www.boschusa.com/images/OxygenSensorInstall.pdf

ThunderZ28

iTrader: (7)

yes they did, just the wrong connector..

Zick

iTrader: (18)

Ah thats good to know, cause I'm probably going to get some when I put my headers on.

ThunderZ28

iTrader: (7)

part numbers for 01 Vette O2 sensors, and female pigtale connectors
O2sensors CarQuest Number -- oxy75-2040
GM pigtale female connector -- GM#15305801/AC Delco# -- PT919

1TRUESS

iTrader: (16)

How much were they? i am having trouble with the switching on my bosch stock replacments not switching fast enough. I heard the f-body guys run the rear vette o2s is that what you bought?