How big was the cam they specd for you?

 

the cam they specd was bigger than i thought .600 lift I and E 226 dur intake, 234 dur exh both numbers at .005" lift, also do you think it is worth porting the intake it's a tbss and he quoted 295 i'm thinking of doing it he said typicly 5 to 15hp in normal aplications my aplication don't seem normal, i'm not looking for the intake to be a huge boost just don't want it to hold me back

 

My LQ4 was around 415-420 awhp with my mods in sig minus the Procharger.

 

My best friend had a LQ9 with stock L92 heads and intake, 236/242 .601/.610 112LSA, full bolt-ons, 3200 convertor, 4wd 4L80E, slinging 20" SS wheels it put down 423hp/392tq.

 

Did you run the 13.2 with those mods minus the procharger too? Im hoping for 430ish AWHP with my new setup.

 

Yes, and was still running the crappy dual exhaust.

 

Nice! That gives me good hopes for my goal of low 13's high 12's.

 

What gears are you running? I have 4.56 and itmoves out pretty good. Would cut consistent 1.8 60' with a best of 1.79. That's withstand my 32.6" at tires

 

I was shifting my cam at 6900.

 

410's Ill prob be shifting around 6500 to 6800. I should be right around 11.0/1 compression.