What to expect from a 80MM TB
#1
TECH Addict
Thread Starter
iTrader: (13)
Join Date: Aug 2005
Location: In the Sticks of Virginia
Posts: 2,267
Likes: 0
Received 0 Likes
on
0 Posts
What to expect from a 80MM TB
Hey you experts, what should I expect from installing a 80MM Throttle Body on my 5.3 truck? I'm already modded w/ cold air, engine-back custom exhaust, MAF, Nelson Tune & Shift Kit.
Is it worth it? Will I feel the diffrence?
Is it worth it? Will I feel the diffrence?
#3
TECH Addict
iTrader: (7)
from wha i experienced on motors with just bolts they do **** , actually hurt you . my buddy has a 98 malibu , ran 15.1 . we did a lot of stuff to it . but he got a tb not sure what size and went back to the track couildnt break a 15.5 , hurt him so bad low end i guess . my other friend has a SI civic , runs 15.5 , after his skunk 2 intake manifold and tb he hits 15.7 , he put the stock tb back on to try it and hasnt been back yet . but i kno thats a import but my buddys malibu the 3.4 is set up like are 5.3 if u think bout it . idk thats just my thought i wouldnt bother with one till i have internals or power adder
#4
TECH Resident
iTrader: (1)
Join Date: Jul 2005
Location: Vidalia, GA.
Posts: 959
Likes: 0
Received 0 Likes
on
0 Posts
I put mine on my truck when I had a lot of bolt on's and I think it actually hurt performance. So I took it off and put my spacer back on and it felt stronger again. but when i went with the Procharger I had them put it back on.
#5
TECH Veteran
if you're not flowing enough air to make the stock throttle body be a restriction, you're wasting your time and money. at the power level you're at, you'll likely lose more than you'll gain.
Trending Topics
#8
TECH Junkie
iTrader: (2)
Join Date: Mar 2005
Location: Spring, TX
Posts: 3,197
Likes: 0
Received 0 Likes
on
0 Posts
Just keep your stock TB. Unless your going to install a twin turbo kit or equivalent forced air induction.
The stock TB has plenty of CFM of flow to handle most power adders as well.
Jim
The stock TB has plenty of CFM of flow to handle most power adders as well.
Jim
#9
17,16,15,14,13,12,11 Drvr
iTrader: (10)
Join Date: Aug 2003
Location: Mont Belvieu, Texas
Posts: 6,713
Likes: 0
Received 0 Likes
on
0 Posts
before i had nelson tune for the bbk 80mm t/b i lost 4/10 of a second at the track, but after we tuned for the t/b i gained 1/10 and 2mph over stock t/b. Same night testing.
On the dyno it showed 10hp gain. But like i said after nelson tuned for it.
On the dyno it showed 10hp gain. But like i said after nelson tuned for it.